CINXE.COM

Co-gasification of Waste Biomass and Plastic for Syngas Productio

<!doctype html> <html lang="en"> <head> <meta charset="utf-8"> <meta name="viewport" content="width=device-width, initial-scale=1, shrink-to-fit=no"> <title>Co-gasification of Waste Biomass and Plastic for Syngas Productio</title> <meta name="keywords" content="Biofuel; Waste plastic; Rice husk; Co-gasification; Syngas"> <meta name="description" content="This work presents an integrated plant-wide process for co-gasification of waste biomass and plastics using steam and CO2 to produce an industrially import.. "/> <meta name="citation_publisher" content="Longdom Publishing S.L"/> <meta name="citation_journal_title" content="Journal of Thermodynamics & Catalysis"> <meta name="citation_title" content="Co-gasification of Waste Biomass and Plastic for Syngas Production with CO2 Capture and Utilization: Thermodynamic Investigation"> <meta name="citation_author" content="Pathipaka Sravani"/> <meta name="citation_author" content="Sangeetha Povari"/> <meta name="citation_author" content="Shadab Alam"/> <meta name="citation_author" content="Lingaiah Nakka"/> <meta name="citation_author" content="Surananai Srinath"/> <meta name="citation_author" content="Sumana Chenna"/> <meta name="citation_year" content="2024"> <meta name="citation_volume" content="15"> <meta name="citation_issue" content="2"> <meta name="citation_doi" content="10.35248/2157-7544.24.15.379"> <meta name="citation_issn" content="2157-7544"> <meta name="citation_publication_date" content="2024/03/12"/> <meta name="citation_firstpage" content="1"> <meta name="citation_lastpage" content="11"> <meta name="citation_abstract" content="This work presents an integrated plant-wide process for co-gasification of waste biomass and plastics using steam and CO2 to produce an industrially important feed stock i.e., syngas with molar ratio of H2/CO2. The proposed plant wide process is designed with key feature of Carbon Capture and Utilization (CCU) and made self-sustainable by utilizing a fraction of syngas for meeting the heat, steam and CO2 demands with additional heat recovery and steam generation and power generation sections. Further, steady state plant wide models are developed using ASPEN Plus, and simulations are performed for the co-gasification of High-Density Polyethylene (HDPE) and Rice Husk (RH) at varying feed compositions (0%-100% HDPE). Further, rigorous sequential parametric sensitivity analysis is performed to determine the optimal process parameters and investigate the impact of feed composition on the product yield. Results revealed that Steam to Carbon ratio (S/C) should be maintained above 1.2 to attain complete carbon conversion within the gasifier which tends to enhance the overall performance of the integrated scheme. The comparative investigation on co-gasification of HDPE and RH revealed that an increase in weight percentage of HDPE in the feed mixture resulted in increased syngas production and plant efficiency due to the high carbon and low ash content of HDPE. Gasification of pure HDPE waste resulted in the maximum output of 2.2 kg of syngas/kg of feed with a net plant efficiency of 68%, while in the case of pure RH the syngas production and efficiency dropped to 0.60 kg/kg of feed and 35%, respectively."> <meta name="citation_fulltext_html_url" content="https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html"> <meta name="citation_pdf_url" content="https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-i.pdf"> <meta name="citation_abstract_html_url" content="https://www.longdom.org/abstract/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-i-106854.html"> <meta name="format-detection" content="telephone=no" /> <meta name="google-site-verification" content="NomPTP94YozsgvD3NEFpNqUfY88e0TU0L64zNzZTpd0" /> <meta itemprop="name" content="longdom" /> <meta http-equiv="X-UA-Compatible" content="IE=edge" /> <meta name="ROBOTS" content="INDEX,FOLLOW" /> <meta name="googlebot" content="INDEX,FOLLOW" /> <meta name="viewport" content="width=device-width, initial-scale=1, shrink-to-fit=no" /> <link rel="canonical" href="https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" /> <link rel="alternate" href="https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" hreflang="en-us" /> <script type="application/ld+json"> { "@context": "https://schema.org", "@type": "Organization", "url": "https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html", "logo": "https://www.longdom.org/assets/img/longdom-logo.svg" } </script> <!-- Bootstrap CSS --> <link rel="stylesheet" href="https://stackpath.bootstrapcdn.com/bootstrap/4.3.1/css/bootstrap.min.css" /> <link href="/assets/css/longdom.css" rel="stylesheet" /> <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/animate.css/3.7.0/animate.min.css" /> <!-- Fontawesome CSS --> <link rel="stylesheet" href="https://use.fontawesome.com/releases/v5.7.1/css/all.css" /> <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/font-awesome/4.3.0/css/font-awesome.min.css" /> <!-- Google Fonts --> <link href="https://fonts.googleapis.com/css?family=Montserrat:100,100i,200,200i,300,300i,400,400i,500,500i,600,600i,700,700i,800,800i,900,900i|Open+Sans:300,300i,400,400i,600,600i,700,700i,800,800i|Raleway:100,100i,200,200i,300,300i,400,400i,500,500i,600,600i,700,700i,800,800i,900,900i" rel="stylesheet" /> <link href="/assets/css/ionicons.min.css" rel="stylesheet" /> <!--====================== Custom Scrollbar CSS ========================== --> <link rel="stylesheet" href="/assets/css/jquery.mCustomScrollbar.min.css" /> <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/bootstrap-select/1.13.2/css/bootstrap-select.min.css" /> <!--============ Globa CSS ================ --> <link rel="stylesheet" href="/assets/css/global.css" /> <!--============ Styles ================ --> <link rel="stylesheet" href="/assets/css/styles.css" /> <link rel="stylesheet" type="text/css" href="/assets/css/author.css" /> <link rel="icon" href="/assets/img/favicon.png" type="image/gif" /> <link rel="stylesheet" href="/assets/css/coolautosuggest.css" /> <!-- Global site tag (gtag.js) - Google Analytics <script async src="https://www.googletagmanager.com/gtag/js?id=UA-115877259-1"></script> <script> window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'UA-115877259-1'); </script>--> <!-- Google tag (gtag.js) --> <script async src="https://www.googletagmanager.com/gtag/js?id=G-LE7WH45F9C"></script> <script> window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'G-LE7WH45F9C'); </script> <meta property="og:title" content="Longdom Publishing SL | Open Access Journals" /> <meta property="og:site_name" content="Longdom" /> <meta property="og:url" content="https://www.longdom.org/" /> <meta property="og:description" content="Longdom Publishing SL is one of the leading international open access journals publishers, covering clinical, medical, and technology-oriented subjects" /> <meta property="og:type" content="article" /> <meta property="og:image" content="https://www.longdom.org/assets/img/longdom-logo.svg" /> <meta name="twitter:card" content="summary" /> <meta name="twitter:site" content="@org_longdom" /> <meta name="twitter:title" content="Longdom Publishing SL | Open Access Journals" /> <meta name="twitter:description" content="Longdom Publishing SL is one of the leading international open access journals publishers, covering clinical, medical, and technology-oriented subjects." /> <meta name="twitter:image" content="https://www.longdom.org/assets/img/longdom-logo.svg" /> <!-- Facebook Pixel Code --> <script> !function(f,b,e,v,n,t,s){if(f.fbq)return;n=f.fbq=function(){n.callMethod? n.callMethod.apply(n,arguments):n.queue.push(arguments)};if(!f._fbq)f._fbq=n; n.push=n;n.loaded=!0;n.version='2.0';n.queue=[];t=b.createElement(e);t.async=!0; t.src=v;s=b.getElementsByTagName(e)[0];s.parentNode.insertBefore(t,s)}(window, document,'script','//connect.facebook.net/en_US/fbevents.js'); fbq('init', '297919997051754'); fbq('track', "PageView"); </script> <!-- End Facebook Pixel Code --> <script type="text/javascript"> function openimage( theURL, winName, features ) { window.open( theURL, winName, features ); } </script> </head> <body> <header> <!--=======top Navbar==========--> <nav class="navbar navbar-expand-lg navbar-light bg-white shadow-sm deva541"> <div class="container"> <a class="navbar-brand" href="https://www.longdom.org/" title="Longdom Publishing S.L"> <img src="/assets/img/longdom-logo.svg" alt="" height="25"> </a> <button class="navbar-toggler" type="button" data-toggle="collapse" data-target="#navbar" aria-controls="navbar" aria-expanded="false" aria-label="Toggle navigation"> <span class="navbar-toggler-icon"></span> </button> <div class="collapse navbar-collapse justify-content-end" id="navbar"> <div class="navbar-nav"> <a class="nav-item nav-link" href="https://www.longdom.org/" title="Home">Home</a> <div class="nav-item dropdown"> <a class="nav-link dropdown-toggle" href="#" id="Guidelines" role="button" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">Journals</a> <div class="dropdown-menu" aria-labelledby="Journals"> <a class="dropdown-item" href="https://www.longdom.org/journals-by-title.html" title="A-Z Journals">A-Z Journals</a> <a class="dropdown-item" href="https://www.longdom.org/open-access-journals-list.html" title="Browse By Subject">Browse By Subject</a> </div> </div> <div class="nav-item dropdown"> <a class="nav-link dropdown-toggle" href="#" id="Guidelines" role="button" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">Guidelines &amp; Policies </a> <div class="dropdown-menu" aria-labelledby="Guidelines"> <a class="dropdown-item" href="https://www.longdom.org/editorial-policies.html" title="Editorial Policies">Editorial Policies</a> <a class="dropdown-item" href="https://www.longdom.org/submit-manuscript.html" title="Online Submission">Online Submission</a> <a class="dropdown-item" href="https://www.longdom.org/instructions-to-authors.html" title="Instructions to Authors">Instructions to Authors</a> <a class="dropdown-item" href="https://www.longdom.org/policies.html" title="Policies">Policies</a> <a class="dropdown-item" href="https://www.longdom.org/publication-ethics.html" title="Publication ethics & malpractice statement">Publication ethics & malpractice statement</a> <a class="dropdown-item" href="https://www.longdom.org/reviewers.html" title="Reviewers">Reviewers</a> <a class="dropdown-item" href="https://www.longdom.org/terms-conditions.html" title="Terms and Conditions">Terms and Conditions</a> </div> </div> <a class="nav-item nav-link" href="https://www.longdom.org/advertising.html" title="Advertising">Advertising</a> <a class="nav-item nav-link" href="https://www.longdom.org/conferences.html" title="Conferences">Conferences</a> <a class="nav-item nav-link" href="https://www.longdom.org/contact-us.html" title="Contact us">Contact us</a> <div id="google_translate_element"></div> </div> <!-- <div class="form-group mb-0 ml-3"> <form id="tfnewsearch" role="search" action="https://www.longdom.org/search-results.php"> <div class="input-group"> <input type="text" name="keyword" id="keyword" required class="form-control rounded-0" pattern=".{4,40}" placeholder="Search.." aria-label="Recipient's username" aria-describedby="basic-addon2" title="4 to 40 characters" /> <div class="input-group-append"> <button class="btn btn-warning rounded-0" type="submit"><i class="fas fa-search"></i></button> </div> </div> </form> </div> --> </div> </div> </nav> </header> <!--===============Journal header part====================--> <section class="bg-info py-1"> <div class="container"> <div class="row align-items-center justify-content-between"> <!--===============logosection/journal name====================--> <div class="col-12 col-sm-auto"> <img src="https://www.longdom.org/admin/headers/journal-of-thermodynamics--catalysis-logo.svg" alt="Journal of Thermodynamics & Catalysis" width="105" height="105" class="img-fluid mx-auto"> </div> <div class="col-12 col-sm-8"> <h1 class="text-left text-white border-light-blue-200-before font-size-7">Journal of Thermodynamics & Catalysis<br><small class="float-right font-size-5">Open Access</small></h1> </div> <!--===============logo section end====================--> <div class="col-12 col-sm-2 d-none d-sm-block"> <p class="lead">ISSN: 2157-7544</p> <!--========WhatsApp Number============--> <div id="feedback" class="card card-body p-1 font-size-2 shadow-sm z-index-1"> <div class="reach-us-animated"></div> <p class="card-text"><img src="/assets/img/whatsapp.svg" alt="" width="20" class="ml-2"> +44 1300 500008</p> </div> </div> </div> </div> </section> <!--===============Journal Navbar====================--> <nav id="sticky-navbar" class="navbar navbar-expand-lg navbar-dark bg-primary py-0"> <div class="container"> <button class="navbar-toggler" type="button" data-toggle="collapse" data-target="#jrnlNavbar" aria-controls="jrnlNavbar" aria-expanded="false" aria-label="Toggle navigation"> <span class="navbar-toggler-icon"></span> </button> <div class="collapse navbar-collapse justify-content-center" id="jrnlNavbar"> <div class="navbar-nav"> <a class="nav-item nav-link " href="https://www.longdom.org/thermodynamics-catalysis.html" title="Journal Home">Journal Home</a> <div class="nav-item dropdown"> <a class="nav-link dropdown-toggle " href="#" id="EditorialPanel" role="button" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">Editorial Panel <i class="fas fa-caret-down"></i></a> <div class="dropdown-menu" aria-labelledby="EditorialPanel"> <a class="dropdown-item" href="https://www.longdom.org/thermodynamics-catalysis/editor-in-chief.html" title="Editor-in-Chief">Editor-in-Chief</a> <a class="dropdown-item" href="https://www.longdom.org/thermodynamics-catalysis/editorial-board.html" title="Editorial Board">Editorial Board</a> </div> </div> <div class="nav-item dropdown"> <a class="nav-link dropdown-toggle " title="Instructions for Authors" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false" href="#">Instructions for Authors <i class="fas fa-caret-down"></i></a> <div class="dropdown-menu" aria-labelledby="EditorialPanel"> <a class="dropdown-item" href="https://www.longdom.org/thermodynamics-catalysis/instructionsforauthors.html" title="Instructions for Authors">Instructions for Authors</a> <!--<a class="dropdown-item" href="https://www.longdom.org/thermodynamics-catalysis/ethical-malpractices.html" title="Publication ethics & malpractice statement">Publication ethics & malpractice statement</a>--> <a class="dropdown-item" href="https://www.longdom.org/thermodynamics-catalysis/ethical-malpractices.html" title="Publication ethics & malpractice statement">Publication ethics & malpractice statement</a> </div> </div> <a class="nav-link " href="https://www.longdom.org/thermodynamics-catalysis/submit-manuscript.html" title="Submit Manuscript">Submit Manuscript</a> <a class="nav-link " href="https://www.longdom.org/thermodynamics-catalysis/aim-and-scope.html" title="Aims and Scope">Aims and Scope</a> <a class="nav-link " href="https://www.longdom.org/thermodynamics-catalysis/inpress.html" title="Articles in process">Articles in process</a> <!--<a class="nav-link " href="https://www.longdom.org/thermodynamics-catalysis/current-issue.html" title="Current Issue">Current Issue</a>--> <a class="nav-link " href="https://www.longdom.org/thermodynamics-catalysis/archive.html" title="Archive">Archive</a> <div class="nav-item dropdown"> <a class="nav-link dropdown-toggle " href="#" id="SpecialIssues" role="button" data-toggle="dropdown" aria-haspopup="true" aria-expanded="false">Special Issues <i class="fas fa-caret-down"></i></a> <div class="dropdown-menu" aria-labelledby="SpecialIssues"> <a class="dropdown-item" href="https://www.longdom.org/thermodynamics-catalysis/guidelines.html" title="Guidelines">Guidelines</a> <a class="dropdown-item" href="https://www.longdom.org/thermodynamics-catalysis/upcoming-special-issues.html" title="Upcoming Special Issues">Upcoming Special Issues</a> </div> </div> <a class="nav-item nav-link " href="https://www.longdom.org/thermodynamics-catalysis/contact.html" title="Contact">Contact</a> </div> </div> </div> </nav> <script type="text/javascript"> function googleTranslateElementInit() { new google.translate.TranslateElement({pageLanguage: 'en'}, 'google_translate_element'); } </script> <script type="text/javascript" src="//translate.google.com/translate_a/element.js?cb=googleTranslateElementInit"></script> <section class="py-4 content"> <div class="container"> <div class="row"> <aside class="col-12 col-sm-3 order-last order-sm-first"> <a href="https://www.longdom.org/thermodynamics-catalysis/awards-nomination.html" class="btn btn-info btn-block mb-3 border-0 border-left-4 border-info font-size-4"><i class="fa-light fa-award-simple"></i> Awards Nomination </a> <a href="https://www.longdom.org/thermodynamics-catalysis-online-visitors-readers-91.html" class="btn btn-warning btn-block mb-3 border-0 border-left-4 border-info font-size-4"><i class="fas fa-book-reader"></i> 25+ Million Readerbase</a> <!------qrcode---------> <div class="card shadow-sm sidebar mb-3"> <div class="list-group list-group-flush qr_code_image"> <img title="QR" src="https://chart.googleapis.com/chart?chs=185x185&cht=qr&chl=https%3A%2F%2Fwww.longdom.org%2Fopen-access%2Fcogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html&chld=M|0&icqrf=00b1e4" alt="Longdom"/> <!-- social icons--> <nav class="nav nav-pills social-icons-footer sidebar_social_icons a-pl-0"> <a title="Share This Article" target="_blank" class="nav-link" rel="noopener" href="https://www.facebook.com/sharer.php?s=100&amp;p[title]=Co-gasification of Waste Biomass and Plastic for Syngas Production with CO<sub>2</sub> Capture and Utilization: Thermodynamic Investigation&p[url]=https%3A%2F%2Fwww.longdom.org%2Fopen-access%2Fcogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html"><img src="https://www.longdom.org/assets/socials/facebook.png" alt="Longdom" /></a> <a title="Share This Article" target="_blank" class="nav-link" rel="noopener" href="https://web.whatsapp.com/send?text=https%3A%2F%2Fwww.longdom.org%2Fopen-access%2Fcogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" title="Share This Article" target="_blank" class="nav-link"><img src="https://www.longdom.org/assets/socials/whatsapp.png" alt="Longdom"/></a> <a title="Share This Article" target="_blank" class="nav-link" rel="noopener" href="https://www.linkedin.com/sharing/share-offsite/?url=https%3A%2F%2Fwww.longdom.org%2Fopen-access%2Fcogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" title="Share This Article" target="_blank" class="nav-link"><img src="https://www.longdom.org/assets/socials/linkedin.png" alt="Longdom"/></a> <a title="Share This Article" target="_blank" class="nav-link" rel="noopener" href="https://twitter.com/share?text=Co-gasification of Waste Biomass and Plastic for Syngas Production with CO<sub>2</sub> Capture and Utilization: Thermodynamic Investigation&url=https%3A%2F%2Fwww.longdom.org%2Fopen-access%2Fcogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" class="nav-link"><img src="https://www.longdom.org/assets/socials/twitter.png" alt="Longdom" /></a> </nav> <!-- end icons --> </div> </div> <!------qrcode end---------> <!--========== pmc/pubmed articles==================--> <!--========== pmc/pubmed articles==================--> <!--========== indexedin==================--> <h6><a target="_blank" href="https://scholar.google.com/citations?user=CycK4P4AAAAJ&hl=en" title="Click here">Google Scholar citation report</a></h6> <h6 style="font-weight:bold;">Citations : 1003</h6> <p><a target="_blank" href="https://scholar.google.com/citations?user=CycK4P4AAAAJ&hl=en" title="Click here">Journal of Thermodynamics & Catalysis received 1003 citations as per Google Scholar report</a></p> <div class="card shadow-sm sidebar mb-3"> <a href="https://www.longdom.org/thermodynamics-catalysis/citations.html" title="Click here"><img src="https://www.longdom.org/admin/citation-images/journal-of-thermodynamics--catalysis-citation.PNG" alt="Citation" class="img-fluid p_rel" /></a> </div> <h6><a href="https://publons.com/journal/31372/journal-of-thermodynamics-catalysis/" target="_blank" title="Click here">Journal of Thermodynamics & Catalysis peer review process verified at publons</a></h6> <div class="card shadow-sm sidebar mb-3"> <a href="https://publons.com/journal/31372/journal-of-thermodynamics-catalysis/" target="_blank" title="Click here"><img src="https://www.longdom.org/admin/publon-images/journal-of-thermodynamics--catalysis-publon.png" alt="Flyer image" class="p_rel w-100" height="250px"/></a> </div> <!-----supplimentary issues----> <!-----supplimentary issues end----> <div class="card shadow-sm sidebar mb-3"> <h6 class="card-header pr-0">Indexed In</h6> <div class="list-group list-group-flush overflow-view"> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> Open J Gate </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> Genamics JournalSeek </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> JournalTOCs </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> RefSeek </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> Directory of Research Journal Indexing (DRJI) </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> Hamdard University </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> EBSCO A-Z </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> OCLC- WorldCat </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> Proquest Summons </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> Scholarsteer </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> Publons </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> MIAR </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> Euro Pub </div> <div class="list-group-item p-0 pt-2 pl-2"> <i class="fa fa-chevron-right" style="font-size: 11px;color: #0056b3;"></i> Google Scholar </div> </div> <p class="m-0 clearfix"><a href="https://www.longdom.org/thermodynamics-catalysis/indexing.html" title="Click here"><span class="btn btn-warning btn-xs float-right">View More &raquo;</span></a></p> </div> <!--========== indexedin end==================--> <!--===========Useful Links=================--> <div class="card shadow-sm sidebar mb-3"> <h6 class="card-header">Useful Links</h6> <div class="card-body p-0"> <nav class="nav flex-column font-size-3 icon-list icon-list-angle-right a-py-1"> <a class="nav-item nav-link" href="https://www.longdom.org/covid-19-peer-reviewed-journals-articles-special-issues.html" title="Click Here">Covid-19 Journal Articles Issues</a> <a class="nav-item nav-link" href="https://www.longdom.org/thermodynamics-catalysis/aim-and-scope.html" title="Click Here">Aim and Scope</a> <a class="nav-item nav-link" href="https://www.longdom.org/thermodynamics-catalysis/peer-review-process.html" title="Click Here">Peer Review Process</a> <a class="nav-item nav-link" href="https://www.longdom.org/thermodynamics-catalysis/other-comments.html" title="Click Here">Other Comments</a> <a class="nav-item nav-link" href="https://www.longdom.org/thermodynamics-catalysis/advertising.html" title="Click Here">Advertising</a> <a class="nav-item nav-link" href="https://www.longdom.org/thermodynamics-catalysis/citations.html" title="Click Here">Citations Report</a> <a class="nav-item nav-link" href="https://www.longdom.org/thermodynamics-catalysis/indexing.html" title="Click Here">Indexing and Archiving</a> <a class="nav-item nav-link" href="https://www.longdom.org/thermodynamics-catalysis/archive.html" title="Click Here">Table of Contents</a> <a class="nav-item nav-link" href="https://www.longdom.org/submissions/thermodynamics-catalysis.html" title="Click Here">Submit Paper</a> <a class="nav-item nav-link" href="https://www.longdom.org/editorial-tracking/" title="Click Here">Track Your Paper</a> <a class="nav-item nav-link" href="https://www.longdom.org/funded-articles.html" title="Click Here">Funded Work</a> </nav> </div> </div> <!--==========Share This Page==================--> <div class="card shadow-sm sidebar mb-3" style="margin-top:10px"> <h6 class="card-header">Share This Page</h6> <div class="card-body"> <nav class="nav social-icons social-icons-sm"> <a class="nav-link bg-facebook white" href="https://www.facebook.com/sharer.php?u=https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" target="_blank" title="Share with Facebook" rel="noopener"><i class="fab fa-facebook-f"></i></a> <a class="nav-link bg-twitter white" href="https://twitter.com/share?url=https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" rel="noopener" target="_blank" title="Share with Twitter"><i class="fab fa-twitter"></i></a> <a class="nav-link bg-linkedin white" href="https://www.linkedin.com/shareArticle?mini=true&url=https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" rel="noopener" target="_blank" title="Share with Linkdin"><i class="fab fa-linkedin-in"></i></a> <a class="nav-link bg-googleplus white" href="https://plus.google.com/share?url=https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" target="_blank" rel="noopener" title="Share with Google+"><i class="fab fa-google-plus-g"></i></a> <a class="nav-link bg-pinterest white" href="https://pinterest.com/pin/create/button/?url=https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" rel="noopener" target="_blank" title="Share with Pintrest"><i class="fab fa-pinterest-p"></i></a> <a class="nav-link bg-blogger white" href="https://www.blogger.com/blog-this.g?u=https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-investigati-106854.html" rel="noopener" target="_blank" title="Share with Blogger"><i class="fab fa-blogger-b"></i></a> </nav> </div> </div> <!--==========Recommended Journals==============--> <div class="card shadow-sm sidebar mb-3"> <h6 class="card-header">Recommended Journals</h6> <div class="card-body p-0"> <nav class="nav flex-column font-size-3 icon-list icon-list-angle-right a-py-1"> <a class="nav-item nav-link" href="https://www.longdom.org/chemical-engineering-process-technology.html" title="Click Here">Chemical Engineering Journal</a> <a class="nav-item nav-link" href="https://www.longdom.org/physical-chemistry-biophysics.html" title="Click Here">Physical chemistry Journal</a> <a class="nav-item nav-link" href="https://www.longdom.org/mass-spectrometry-purification-techniques.html" title="Click Here">Mass spectrometry Journal</a> </nav> </div> </div> <!--========== Recomended Conferences ==================--> <div class="card shadow-sm sidebar mb-3"> <a href="https://www.longdom.org/thermodynamics-catalysis/advertising.html" title="Click here"><img src="https://www.longdom.org/assets/img/tower-banner.jpg" alt="Flyer image" class="img-fluid p_rel" /> <span class="p_abo cu_roundchip"> <span> <h5><span>25+</span> Million Website Visitors</h5> </span> </span> </a> </div> <!-- video --> <!-- end video --> <!--==========longdom flyer==================--> <div class="card shadow-sm sidebar mb-3"> <h6 class="card-header">Journal Flyer</h6> <img src="https://www.longdom.org/admin/flyers/Journal-of-Thermodynamics--Catalysis-flyer.jpg" alt="Journal of Thermodynamics & Catalysis" class="img-fluid"/> </div> <!--==========relevant topics==================--> <!--Twitter starting--> <div class="sidebar pt-20 pl-10 mt-xs-0" align="center"> <a class="twitter-timeline" href="https://twitter.com/of_catalysis" data-width="450" data-height="300">Tweets by of_catalysis</a> <script async src="https://platform.twitter.com/widgets.js" charset="utf-8"></script> </div> <div class="clear">&nbsp;</div> <!--Twitter ending--> <!--===========open access journals=================--> <div class="card shadow-sm sidebar mb-3"> <h6 class="card-header">Open Access Journals</h6> <div class="card-body p-0 scroll_mang"> <nav class="nav flex-column font-size-3 icon-list icon-list-angle-right a-py-1"> <a class="nav-item nav-link" href="https://www.longdom.org/agri-and-aquaculture-journals.html" title="Click Here">Agri and Aquaculture</a> <a class="nav-item nav-link" href="https://www.longdom.org/biochemistry-journals.html" title="Click Here">Biochemistry</a> <a class="nav-item nav-link" href="https://www.longdom.org/bioinformatics-and-systems-biology-journals.html" title="Click Here">Bioinformatics & Systems Biology</a> <a class="nav-item nav-link" href="https://www.longdom.org/business-and-management-journals.html" title="Click Here">Business & Management</a> <a class="nav-item nav-link" href="https://www.longdom.org/chemistry-journals.html" title="Click Here">Chemistry</a> <a class="nav-item nav-link" href="https://www.longdom.org/clinical-sciences-journals.html" title="Click Here">Clinical Sciences</a> <a class="nav-item nav-link" href="https://www.longdom.org/engineering-journals.html" title="Click Here">Engineering</a> <a class="nav-item nav-link" href="https://www.longdom.org/food-and-nutrition-journals.html" title="Click Here">Food & Nutrition</a> <a class="nav-item nav-link" href="https://www.longdom.org/general-science-journals.html" title="Click Here">General Science</a> <a class="nav-item nav-link" href="https://www.longdom.org/genetics-and-molecular-biology-journals.html" title="Click Here">Genetics & Molecular Biology</a> <a class="nav-item nav-link" href="https://www.longdom.org/immunology-and-microbiology-journals.html" title="Click Here">Immunology & Microbiology</a> <a class="nav-item nav-link" href="https://www.longdom.org/medical-sciences-journals.html" title="Click Here">Medical Sciences</a> <a class="nav-item nav-link" href="https://www.longdom.org/neuroscience-and-psychology-journals.html" title="Click Here">Neuroscience & Psychology</a> <a class="nav-item nav-link" href="https://www.longdom.org/nursing-and-health-care-journals.html" title="Click Here">Nursing & Health Care</a> <a class="nav-item nav-link" href="https://www.longdom.org/pharmaceutical-sciences-journals.html" title="Click Here">Pharmaceutical Sciences</a> </nav> </div> </div> <!--===========open access journals=================--> </aside> <div class="col-12 col-sm-9 full-text"> <div class="row align-items-center justify-content-between"> <div class="col-12 col-sm-4"> <p class="text-muted mb-0"> Research Article - (2024)Volume 15, Issue 2 </p> </div> <div class="col-12 col-sm-8 text-right custom-column"> <a href="https://www.longdom.org/open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-i.pdf" title="View PDF" class="btn btn-sm bg-green-600 rounded-50"><i class="fas fa-file-pdf"></i> View PDF</a> <a href="https://www.longdom.org/pdfdownload.php?download=open-access/cogasification-of-waste-biomass-and-plastic-for-syngas-production-with-cosub2sub-capture-and-utilization-thermodynamic-i.pdf&aid=106854" title="Download PDF" class="btn btn-sm bg-green-600 rounded-50"><i class="fas fa-download"></i> Download PDF</a> </div> </div> <h2 class="font-size-7 mt-2">Co-gasification of Waste Biomass and Plastic for Syngas Production with CO<sub>2</sub> Capture and Utilization: Thermodynamic Investigation</h2> <a href='https://www.longdom.org/author/pathipaka-sravani-67299' title='Pathipaka Sravani' style='color:#555; border-bottom:1px dotted #CCC;'>Pathipaka Sravani</a><sup><a href='#a1'>1</a></sup>, <a href='https://www.longdom.org/author/sangeetha-povari-67300' title='Sangeetha Povari' style='color:#555; border-bottom:1px dotted #CCC;'>Sangeetha Povari</a><sup><a href='#a1'>1</a></sup>, <a href='https://www.longdom.org/author/shadab-alam-67302' title='Shadab Alam' style='color:#555; border-bottom:1px dotted #CCC;'>Shadab Alam</a><sup><a href='#a1'>1</a></sup><sup><a href='#Shadab_Alam'>*</a></sup>, <a href='https://www.longdom.org/author/lingaiah-nakka-67303' title='Lingaiah Nakka' style='color:#555; border-bottom:1px dotted #CCC;'>Lingaiah Nakka</a><sup><a href='#a2'>2</a></sup>, <a href='https://www.longdom.org/author/surananai-srinath-67305' title='Surananai Srinath' style='color:#555; border-bottom:1px dotted #CCC;'>Surananai Srinath</a><sup><a href='#a3'>3</a></sup> and <a href='https://www.longdom.org/author/sumana-chenna-67306' title='Sumana Chenna' style='color:#555; border-bottom:1px dotted #CCC;'>Sumana Chenna</a><sup><a href='#a1'>1</a></sup><sup><a href='#Sumana_Chenna'>*</a></sup> <div>&nbsp;</div> <a id="Shadab_Alam"></a> <strong><sup>*</sup>Correspondence:</strong> Shadab Alam, Department of Engineering and Technology Transfer, CSIR-Indian Institute of Chemical Technology, Hyderabad, India, <strong>Email:</strong> <i class='fa fa-envelope' aria-hidden='true' title='shadab.8776@csiriict.in'></i> <a id="Sumana_Chenna"></a> Sumana Chenna, Department of Engineering and Technology Transfer, CSIR-Indian Institute of Chemical Technology, Hyderabad, India, <strong>Email:</strong> <i class='fa fa-envelope' aria-hidden='true' title='sumana@iict.res.in'></i> <p><a href="#ai"><strong>Author info &raquo;</strong></a></p> <div class="card bg-light mb-3"> <div class="card-body px-3 pb-0"> <h2 class="font-size-5">Abstract</h2> <p>This work presents an integrated plant-wide process for co-gasification of waste biomass and plastics using steam and CO<sub>2</sub> to produce an industrially important feed <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/stock-6023.html'>stock</a> <em>i.e.,</em> syngas with molar ratio of H<sub>2</sub>/CO<sub>2</sub>. The proposed plant wide process is designed with key feature of Carbon Capture and Utilization (CCU) and made self-sustainable by utilizing a fraction of syngas for meeting the heat, steam and CO<sub>2</sub> demands with additional heat recovery and steam generation and <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/power-generation-27063.html'>power generation</a> sections. Further, steady state plant wide models are developed using ASPEN Plus, and simulations are performed for the co-gasification of High-Density Polyethylene (HDPE) and <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>Rice</a> Husk (RH) at varying feed compositions (0%-100% HDPE). Further, rigorous sequential parametric sensitivity analysis is performed to determine the optimal process parameters and investigate the impact of feed composition on the product yield. Results revealed that Steam to Carbon ratio (S/C) should be maintained above 1.2 to attain complete carbon conversion within the gasifier which tends to enhance the overall performance of the integrated scheme. The comparative <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/investigation-46257.html'>investigation</a> on co-gasification of HDPE and RH revealed that an increase in weight percentage of HDPE in the feed mixture resulted in increased syngas production and plant efficiency due to the high carbon and low ash content of HDPE. Gasification of pure HDPE waste resulted in the maximum output of 2.2 kg of syngas/kg of feed with a net plant efficiency of 68%, while in the case of pure RH the syngas production and efficiency dropped to 0.60 kg/kg of feed and 35%, respectively.</p> <h4 class="font-size-4">Keywords</h4> <p>Biofuel; Waste plastic; Rice husk; Co-gasification; Syngas</p> </div> </div> <h4>Highlights</h4> <p> &bull; Thermodynamic modelling for co-gasification of <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>Rice</a> Husk (RH) and polyethylene.<br /> &bull;CO<sub>2</sub> and steam used as gasifying agent fors yngas production with H<sub>2</sub>/CO ratio of 2.<br /> &bull; Process steam and CO<sub>2</sub> demand decreases with increase in RH wt.% in feed mixture.<br /> &bull; Syngas production and efficiency decreases with increase in RH wt.% in feed mixture.</p> <h4>Introduction</h4> <p>Plastic waste is one of the major causes of environmental pollution, as it is not biodegradable and it can end up in landfills, oceans, and other natural environments, causing harm to wildlife and ecosystems. Moreover, plastic waste breaks down into micro plastics, it can enter the air, water and food chain leading to severe health hazards to humans and animals. Globally, more than 400 Million Tons per Annum (MTA) of plastic waste is generated and India ranks as the second-highest annual producer of plastic waste (27 MTA), behind the United States (34 MTA) [<a href="#1" title="1">1</a>]. Among the generated waste globally, only 9% is recycled, 12% is incinerated, and the remaining 79% ends up in landfills and dumps which becomes a major threat to the environment [<a href="#2" title="2">2</a>]. High Density Polyethylene (HDPE) accounts for most of the plastic waste generated globally, weighing in at ~40%, compared to India, where it makes up 35%-38%, as shown in Figure 1A. Another important class of waste generated in large quantities is agricultural waste such as <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>rice</a> husks, wheat straw, and corn stover which is estimated to be around 1400 MTA globally [<a href="#3" title="3">3</a>]. Among the various agricultural waste, rice husk is the most prevalent type as shown in Figure 1B. India and China together generates ~72 MTA <em>i.e.,</em> almost 50% of the world&rsquo;s <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>rice</a> husk [<a href="#4" title="4">4</a>]. According to statistics, ~0.30-0.70 kg of <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/fuel-22119.html'>fuel</a> (equivalent to petroleum) can be produced from 1 kg of biomass waste [<a href="#5" title="5">5</a>,<a href="#6" title="6">6</a>]. Since these abundant agricultural wastes are carbonaceous, they can be used as a replacement for fossil fuels and as a large-scale source of clean energy production, reducing the nation's reliance on imported gasoline and diesel (<strong>Figure 1</strong>).</p> <a onclick="openimage('https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-Indian-25262-g001.png','','scrollbars=yes,resizable=yes,width=500,height=330')" class="thumbnail"> <img src="https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-Indian-25262-g001.png" class="img-thumbnail img-fluid d-block mx-auto" alt="Thermodynamics-Catalysis" title="Thermodynamics-Catalysis" /> </a> <p><strong>Figure 1:</strong> Indian (a) Plastic waste composition and (b) Agricultural waste.</p> <p>However, most of these biomass/plastic wastes are either burned openly or disposed in landfills, resulting in release of greenhouse gases (CO<sub>2</sub> and CH<sub>4</sub>) along with other hazardous gases (SO<sub>x</sub> and NO<sub>x</sub>) and particulate matters [<a href="#7" title="7">7</a>]. Utilization and conversion of waste to useful products are essential for addressing environmental, social, and economic challenges associated with plastic waste. As a result, over the past decade the attention has shifted to thermochemical conversion of plastic and biomass <em>via</em> pyrolysis, gasification, or combustion because of their potential to generate heat and power. Among those methods gasification has drawn the greatest interest because of its wide adaptability towards various feed and capability to produce different products depending upon the type and amount of the gasifying agents <em>i.e.,</em> air, O<sub>2</sub>, steam or CO<sub>2</sub> used. Lately, co-gasification of biomass and plastic waste has emerged as one of the most effective way to manage waste while also producing value added syngas [<a href="#8" title="8">8</a>]. It is also useful for waste reduction, makes energy recovery easier, helps to mitigate climate change, promotes resource conservation, and has several economic benefits by generating new jobs in waste management and energy production and lowering the cost of waste disposal and energy production. Through literature review on cogasification of biomass and plastic waste, through Web of Science with keywords &ldquo;Co-gasification&rdquo;, &ldquo;plastic&rdquo; and &ldquo;biomass&rdquo; in all fields yielded 133 results of which just 14 <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/articles-12264.html'>articles</a> have performed thermodynamic modelling using ASPEN plus. Table 1 provides a detailed literature review on ASPEN plus modelling studies for co-gasification of different biomass and plastic waste. Various biomass such as <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>Rice</a> Husk (RH), sawdust, wood chips, wheat straw, <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/olive-21612.html'>olive</a> pomace, hazelnut shells, Barley and vine pruning&rsquo;s have been reported to be co-gasified with different waste plastics such as Polyethylene (PE), High Density Polyethylene (HDPE), Polypropylene (PP), Polyethylene Terephthalate (PET), Polystyrene (PS), Plastic Solid Waste (PSW), and Sachet Water Plastic Waste (SWPW). Except for one study that utilized CO<sub>2</sub> and steam as gasifying agents, most of the reported thermodynamic studies have used air, O<sub>2</sub> or steam both to produce syngas with varying H<sub>2</sub>/CO ratios. The major driving force of our study is to examine the thermodynamic viability and potential benefits of integrating &ldquo;co-gasification of waste biomass and plastic&rdquo; with &ldquo;Carbon Capture and Utilization (CCU)&rdquo; in terms of syngas generation, H<sub>2</sub>/CO ratio, CO<sub>2</sub> utilization, and net plant efficiency. Co-gasification coupled with CCU process are still not developed sufficiently for commercialization, necessitating additional research to make ground-breaking discoveries. The current work is primarily focused on thermodynamic <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/investigation-46257.html'>investigation</a> of an integrated process for co-gasification of <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>Rice</a> Husk (RH) and High-Density Polyethylene (HDPE) for syngas production with CCU. Steady state plant wide models are developed using ASPEN Plus, for the co-gasification of RH and HDPE (at varying composition ranging from 0-100% RH) with CCU for syngas production with H<sub>2</sub>/CO of 2. The integrated scheme is made self-sustainable by burning a fraction of syngas produced to meet the process heat and steam demand along with the incorporation of Heat Recovery and Steam Generation (HRSG) and power generation sections. Further, sequential parametric sensitivity analysis is performed to determine the optimal process parameters and investigate the impact of feed composition (<em>i.e.,</em> wt.% of plastic in total feed), steam to carbon ratio, and CO<sub>2</sub> to carbon ratio on the overall performance of the integrated scheme (<strong>Table 1</strong>).</p> <div class="table-responsive"> <table class="table table-striped"> <thead> <tr> <th rowspan="2">Process type</th> <th colspan="2">Feed</th> <th rowspan="2">T (&deg;C)</th> <th rowspan="2">Gasifying agents</th> <th rowspan="2">Product</th> <th rowspan="2">References</th> </tr> <tr> <th>Biomass</th> <th>Plastic</th> </tr> </thead> <tbody> <tr> <td>Co-gasification</td> <td>Rice husk</td> <td>PE</td> <td>850</td> <td>Air, steam</td> <td>Syngas</td> <td>Tian, et al.</td> </tr> <tr> <td>Co-gasification</td> <td>Sawdust</td> <td>HDPE</td> <td>700</td> <td>Steam, CO<sub>2</sub></td> <td>Syngas</td> <td>Chai, et al.</td> </tr> <tr> <td>Co-gasification</td> <td>Sawdust</td> <td>PE, PP</td> <td>750</td> <td>Steam</td> <td>Syngas</td> <td>Singh, et al.</td> </tr> <tr> <td>Co-gasification</td> <td>Algae</td> <td>PE</td> <td>800</td> <td>O<sub>2</sub></td> <td>H<sub>2</sub></td> <td>Rosha, et al.</td> </tr> <tr> <td>Co-Pyrolysis</td> <td>Fiberglass, <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/olive-21612.html'>olive</a> pomace</td> <td>PP</td> <td>500</td> <td>-</td> <td>Syngas</td> <td>Ouazzani, et al.</td> </tr> <tr> <td>Pyrolysis</td> <td>Wood chips</td> <td>PS</td> <td>500</td> <td>-</td> <td>Power</td> <td>Gunukula and Tran</td> </tr> <tr> <td>Co-gasification</td> <td>Barley and wheat straw</td> <td>PE, PP</td> <td>850</td> <td>Air</td> <td>Bio-jet fuel</td> <td>L&oacute;pez-Fern&aacute;ndez, et al.</td> </tr> <tr> <td>Co-gasification</td> <td>Vine prunings</td> <td>PET</td> <td>800</td> <td>Air, steam</td> <td>Syngas</td> <td>Tavares, et al.</td> </tr> <tr> <td>Co-gasification</td> <td>Vine prunings</td> <td>PET</td> <td>600</td> <td>O<sub>2</sub></td> <td>Syngas</td> <td>Ramos, et al.</td> </tr> <tr> <td>Co-gasification</td> <td>Rice husk</td> <td>SWPW</td> <td>850</td> <td>Steam</td> <td>Power</td> <td>Salisu, et al.</td> </tr> <tr> <td>Co-gasification</td> <td>Hazelnut shells</td> <td>Sewage sludges</td> <td>850</td> <td>Air</td> <td>Syngas</td> <td>Barontini, et al.</td> </tr> <tr> <td>Plasma gasification</td> <td>MSW</td> <td>PSW</td> <td>850</td> <td>O<sub>2</sub>, steam</td> <td>Syngas, H<sub>2</sub></td> <td>Mazzoni and Janajreh</td> </tr> </tbody> </table> </div> <p><strong>Table 1:</strong> Modelling studies on plastic waste and biomass conversion.</p> <h4>Materials and Methods</h4> <p><strong> Process description</strong></p> <p> <strong>Figure 1</strong> provides the plant-wide schematic for the conversion of waste plastic to syngas. In this work, a feed mixture consisting of RH and HDPE is investigated at mass ratios ranging from 0 to100% of RH in the feed mixture. The proximate and ultimate analysis of RH and HDPE is provided in <strong>Table 2</strong>. Initially, the waste plastics are cleansed to remove the dirt and sand with an equal mass ratio of water, then crushed to 1-3 mm particle size. Plastic waste is then completely dried to remove all the moisture content, at 140&deg;C. Similarly, RH was crushed to 1-3 mm size without washing. The crushed waste materials were then co-fed to the gasifier, where they were initially paralyzed at 500&deg;C into their volatile constituents and char. The char obtained is then completely gasified at 850&deg;C using steam to produce syngas. The lower hydrocarbons/volatile matters obtained during gasification and pyrolysis are then reformed using CO<sub>2</sub> and steam at 850&deg;C to obtain syngas with H<sub>2</sub>/CO molar ratio of 2. The outlet gas (or reformer gas) from the gasifier is then cooled to 150&deg;C in Heat Recovery and Steam Generation (HRSG) section to produce High Pressure (HP) steam at 80 atm, which is expanded in a Steam Turbine (ST) to generate power. The exhaust from ST at 1 atm is sent to the gasification and reforming sections to meet the process steam demand. The reformer gas at 150&deg;C from the HRSG section is then used for drying/preheating the feed mixture to 140&deg;C. The reformer gas then enters the gas cleanup section where it undergoes cleaning in three stages for the removal of moisture in condenser, sulfur impurities <em>via</em> Selexol process and finally CO<sub>2</sub> capture. The energy required during the Selexol process and CO<sub>2</sub> capture unit were reported to be 5000 kJ/kg of SO<sub>x</sub> and 3950 kJ/kg of CO<sub>2</sub>, respectively. A fraction of the CO<sub>2</sub> captured was utilized during the gasification/reforming. The clean syngas obtained with H<sub>2</sub>/CO of 2 was then compressed to 5 atm and stored. A fraction of the compressed syngas was burnt in the combustor using compressed air at 5 atm. The products of combustion were then expanded in the gas turbine to generate power. The hot exhaust from the gas turbine was further used to jacket the gasifier to supply the required heat to the process (<strong>Figure 2</strong> and <strong>Table 2</strong>).</p> <a onclick="openimage('https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-Process-25262-g002.png','','scrollbars=yes,resizable=yes,width=500,height=330')" class="thumbnail"> <img src="https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-Process-25262-g002.png" class="img-thumbnail img-fluid d-block mx-auto" alt="Thermodynamics-Catalysis" title="Thermodynamics-Catalysis" /> </a> <p><strong>Figure 2:</strong> Process description for waste plastic conversion to syngas.</p> <div class="table-responsive"> <table class="table table-striped"> <thead> <tr> <th colspan="3">Proximate analysis</th> </tr> </thead> <tbody> <tr> <td><strong>Components</strong></td> <td><strong>Rice husk</strong></td> <td><strong>HDPE</strong></td> </tr> <tr> <td>Moisture</td> <td>9.88</td> <td>0</td> </tr> <tr> <td>VM</td> <td>66.12</td> <td>99.9</td> </tr> <tr> <td>FC</td> <td>14.18</td> <td>0</td> </tr> <tr> <td>Ash</td> <td>19.7</td> <td>0.1</td> </tr> <tr> <td colspan="3"><strong>Ultimate analysis (dry basis)</strong></td> </tr> <tr> <td>C</td> <td>37.55</td> <td>83.3</td> </tr> <tr> <td>H<sub>2</sub></td> <td>4.61</td> <td>13.9</td> </tr> <tr> <td>N2</td> <td>0.46</td> <td>0.13</td> </tr> <tr> <td>S</td> <td>0.01</td> <td>0.07</td> </tr> <tr> <td>O<sub>2</sub></td> <td>37.67</td> <td>2.5</td> </tr> <tr> <td>Ash</td> <td>19.7</td> <td>0.1</td> </tr> </tbody> </table> </div> <p><strong>Table 2: </strong>Proximate and ultimate analysis of different waste plastics.</p> <p><strong>Process modelling and simulation</strong></p> <p> Self-sustained steady state plant-wide ASPEN Plus models were developed for co-gasification of RH with HDPE to produce syngas coupled with CCU. The models were developed and optimized individually for 11 different compositions of RH and HDPE feed mixture ranging from 0-100% RH. The ASPEN Plus model flow sheet for the integrated process is shown in <strong>Figure 2</strong>. A stream class called MCINCPSD is defined before the <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/simulation-28705.html'>simulation</a> begins, as the overall process contains RH and HDPE, which are categorized as non-conventional streams with particle size distribution, while H<sub>2</sub>, CO, CH<sub>4</sub>, CO<sub>2</sub>, NO<sub>2</sub>, NO, O<sub>2</sub>, H<sub>2</sub>O, S, SO<sub>2</sub>, and SO<sub>3</sub> are regarded as conventional streams, and C is a pure solid representing char. The enthalpy and density of the feed mixture in this case were evaluated using the HCOALGEN and DCOALIGT methods. The Peng Robinson-Boston Mathias (PR-BM) method was used to simulate the properties of all components. No tar formation is considered during thermochemical conversion due to high gasification temperature and use of oxidizing agents (steam and CO<sub>2</sub>) in excess [<a href="#9" title="9">9</a>,<a href="#10" title="10">10</a>]. 100 kg/h of feed mixture was taken as the basis for the comparison of the 11 different cases of feed composition. The crushed feed of RH and HDPE were initially pyrolyzed using separate RYield reactors (B5 and B7) to break them down into its constituent elements based on their respective ultimate analysis as reported in <strong>Table 2</strong>. The constituent&rsquo;s elements of RH and HDPE obtained from the RYield reactors are mixed and co-fed to the RGibbs reactor (B9) which acts as a gasifier. The char is gasified using steam and products are obtained from the RGibbs reactor based on the minimization of Gibbs free energy. Further the product gas from B9 unit enters another RGibbs reactor which acts as the reformer where the unconverted hydrocarbons/volatile matters such as CH<sub>4</sub> is converted using CO<sub>2</sub> and steam to syngas with H2/CO ratio of 2. The syngas obtained is cooled in HeatX (B9) unit while simultaneously producing HP steam. The partially cooled syngas is further used as jacket (B13) for pre-heating/drying the plastic waste. The cooled syngas is then purified by moisture removal in Flash (B14), sulfur removal in Separator (B15), CO<sub>2</sub> removal in Separator (B16) units. The energy required for sulfur and CO<sub>2</sub> separation were assumed to be 5000 kJ/kg of SO<sub>x</sub> and 3950 kJ/kg of CO<sub>2</sub>, respectively. The cleaned syngas was then compressed and a fraction of it was burnt to meet the process energy needs [<a href="#11" title="11">11</a>,<a href="#12" title="12">12</a>]. <strong>Table 3</strong> gives detailed specifications of the ASPEN Plus modules that were used during the modelling. Multiple design specs and calculator blocks are used as feed backward and feed forward controllers to manage the process parameters heat, steam, CO<sub>2</sub> and temperature demands. The details of the design specs and calculator blocks used is provided in <strong>Tables 4 and 5</strong>, respectively (<strong>Figure 3</strong> and <strong>Tables 3-5</strong>).</p> <a onclick="openimage('https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-plastic-25262-g003.png','','scrollbars=yes,resizable=yes,width=500,height=330')" class="thumbnail"> <img src="https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-plastic-25262-g003.png" class="img-thumbnail img-fluid d-block mx-auto" alt="Thermodynamics-Catalysis" title="Thermodynamics-Catalysis" /> </a> <p><strong>Figure 3:</strong> Plant wide model for waste plastic conversion to syngas.</p> <div class="table-responsive"> <table class="table table-striped"> <thead> <tr> <th>Unit</th> <th>Module</th> <th>Description</th> <th>Operating conditions</th> </tr> </thead> <tbody> <tr> <td>B1</td> <td>Pump</td> <td>Water pumping for washing</td> <td>Discharge Pressure (DP): 1.1 atm</td> </tr> <tr> <td>B2</td> <td>Sep</td> <td>Washing plastic waste</td> <td>Water in WP=5 wt. %</td> </tr> <tr> <td>B3</td> <td>Crusher</td> <td>Reducing particle size to &lt;3 mm</td> <td>PSD: 1 mm-3 mm</td> </tr> <tr> <td>B4</td> <td>Flash2</td> <td>Dryer: Removing all moisture</td> <td>T:140&deg;C, P:1 atm</td> </tr> <tr> <td>B5</td> <td>RYield</td> <td>Pyrolyzer: Decomposing plastic waste to its elemental composition</td> <td>T:500&deg;C, P:1 atm</td> </tr> <tr> <td>B6</td> <td>Crusher</td> <td>Reducing particle size to &lt;3 mm</td> <td>PSD: 1 mm-3 mm</td> </tr> <tr> <td>B7</td> <td>RYield</td> <td>Pyrolyzer: Decomposing <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>Rice</a> Husk its elemental composition</td> <td>T:500&deg;C, P:1 atm</td> </tr> <tr> <td>B8</td> <td>Mixer</td> <td>To mix both streams coming from pyrolyzer 1 and 2</td> <td>&nbsp;</td> </tr> <tr> <td>B9</td> <td>RGibbs</td> <td><strong>Gasifier:</strong> Convert fixed carbon and other volatile matter using steam</td> <td>T:850&deg;C, P:1 atm</td> </tr> <tr> <td>B10</td> <td>RGibbs</td> <td><strong>Reformer:</strong> To obtain H<sub>2</sub>/CO molar ratio of 2 using CO<sub>2</sub> and steam</td> <td>T:850&deg;C, P:1 atm</td> </tr> <tr> <td>B11</td> <td>HeatX</td> <td>HP Steam generator and cools RG</td> <td>Hot stream outlet T: 150&deg;C</td> </tr> <tr> <td>B12</td> <td>Pump</td> <td>Pumping water for HP steam</td> <td>P: 80 atm</td> </tr> <tr> <td>B13</td> <td>Heater</td> <td>Jacketing dryer using RG</td> <td>P: 1 atm</td> </tr> <tr> <td>B14</td> <td>Flash2</td> <td>Removing moisture from SG</td> <td>T:25&deg;C, P:1 atm</td> </tr> <tr> <td>B15</td> <td>Sep</td> <td>Removing sulphur impurities</td> <td>S, SO<sub>2</sub>, SO<sub>3</sub> in stream 19 is 0</td> </tr> <tr> <td>B16</td> <td>Sep</td> <td>CO<sub>2</sub> separation</td> <td>CO<sub>2</sub> in stream 21 is 0</td> </tr> <tr> <td>B17</td> <td>Compr</td> <td>SG compressor</td> <td>DP: 5 atm, Isentropic Efficiency: 0.9</td> </tr> <tr> <td>B18</td> <td>Splitter</td> <td>Splits SG for burning and storing</td> <td>Split fraction controlled by Design Spec</td> </tr> <tr> <td>B19</td> <td>Compr</td> <td>Air compressor</td> <td>DP: 5 atm, Isentropic Efficiency: 0.9</td> </tr> <tr> <td>B20</td> <td>RStoic</td> <td>SG combustion</td> <td>Q: 0 kW, P: 5 atm</td> </tr> <tr> <td>B21</td> <td>Compr</td> <td>Gas turbine</td> <td>DP: 1 atm, Isentropic Efficiency: 0.9</td> </tr> <tr> <td>B22</td> <td>Heater</td> <td>Jackets the waste plastic conversion process <em>i.e.</em>, reactors B5, B7, B9 and B10</td> <td>P: 1 atm</td> </tr> <tr> <td>B23</td> <td>Compr</td> <td>Steam turbine</td> <td>DP: 1 atm, Isentropic Efficiency: 0.9</td> </tr> <tr> <td>B24</td> <td>Splitter</td> <td>Splits hot steam to the gasification and reforming units</td> <td>Split fraction controlled by design spec</td> </tr> <tr> <td>B25</td> <td>Splitter</td> <td>Splits captured CO<sub>2</sub></td> <td>Split fraction controlled by design spec</td> </tr> </tbody> </table> </div> <p><strong>Table 3</strong>: Details of ASPEN Plus modules used.</p> <div class="table-responsive"> <table class="table table-striped"> <thead> <tr> <th>S. no.</th> <th>Design specifications</th> <th>Target variable</th> <th>Manipulated variable</th> </tr> </thead> <tbody> <tr> <td>DS1</td> <td>To obtain syngas with desired H<sub>2</sub>/CO ratio of 2 by varying the mass flowrate of captured CO<sub>2</sub> entering the reformer</td> <td>H<sub>2</sub>/CO in steam 17: 2</td> <td>Mass flowrate of stream 16</td> </tr> <tr> <td>DS2</td> <td>To allow HDPE to retain only 5% of moisture content during washing</td> <td>Mass fraction of H<sub>2</sub>O in stream 4: 0.05</td> <td>Mass flowrate of stream 5</td> </tr> <tr> <td>DS3</td> <td>To avoid violation of 2<sup>nd</sup> law of <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/thermodynamics-306.html'>thermodynamics</a> by keeping the temperature of the exhaust gas (from gas turbine) after supplying heat to the gasifier, 10&deg;C above the dried HDPE feed temperature (140&deg;C) by burning the required amount of syngas in the combustor</td> <td>Temperature of stream 35: 150&deg;C</td> <td>Mass flowrate of stream 30</td> </tr> <tr> <td>DS4</td> <td>Minimum amount of steam required to be sent to the gasifier to completely convert all the char obtained during pyrolysis of RH and HDPE to syngas</td> <td>Mass flowrate of stream 38: (1.46* mass flow rate of C in stream 13) mass flowrate of stream 7</td> <td>Split fraction of B24</td> </tr> </tbody> </table> </div> <p><strong>Table 4:</strong> Design Specifications (DS) considered in the proposed schemes model development.</p> <div class="table-responsive"> <table class="table table-striped"> <thead> <tr> <th>S. no.</th> <th>Description</th> <th>Manipulated variable</th> </tr> </thead> <tbody> <tr> <td>CB1</td> <td>Excess air required to maintain the combustor temperature of 1300&deg;C, which in turn avoids the temperature of the exhaust gas to not fall below 150&deg;C, after supplying the process heat</td> <td>Molar flowrate of stream 31: 2.65* stoichiometric air required to burn H<sub>2</sub>, CO and CH<sub>4</sub> in stream 30</td> </tr> <tr> <td>CB2</td> <td>Amount of HP-steam to be generated should be 20% in excess to the steam demand of the gasifier</td> <td>Mass flowrate of stream 39: 1.2* Mass flowrate of stream 38</td> </tr> <tr> <td>CB3</td> <td>Amount of water required for washing HDPE should be equal to the mass flowrate of HDPE</td> <td>Mass flowrate of stream 1: Mass flowrate of stream 3</td> </tr> </tbody> </table> </div> <p><strong>Table 5:</strong> Calculator Blocks (CB) considered in the proposed schemes model development.</p> <h4>Results and Discussion</h4> <p> Sequential parametric sensitivity analysis is used to analyze and obtain the optimal process parameters for each of the 11 cases of different feed mixture ranging from 0 to 100% HDPE. <strong>Figure 4</strong> shows the effect of varying the Steam to Carbon (S/C) ratio from 0.8 to 2, on carbon conversion within the gasifier for the case of 50% of RH and 50% of HDPE at 850&deg;C. It was found that as the S/C ratio rises, the amount of unconverted carbon in the gasifier reduces which becomes zero at a S/C ratio of 1.2 [<a href="#13" title="13">13</a>-<a href="#15" title="15">15</a>].</p> <a onclick="openimage('https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-carbon-25262-g004.png','','scrollbars=yes,resizable=yes,width=500,height=330')" class="thumbnail"> <img src="https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-carbon-25262-g004.png" class="img-thumbnail img-fluid d-block mx-auto" alt="Thermodynamics-Catalysis" title="Thermodynamics-Catalysis" /> </a> <p><strong>Figure 4:</strong> Effect of S/C mass ratio on carbon conversion within the gasifier.</p> <p><strong>Figure 5</strong> shows the effect of S/C ratio on the overall syngas production, net amount of syngas consumed to meet the process heat demand and net plant efficiency. It was observed that as the S/C ratio increased from 0.8 to 1.4 the net plant efficiency increased from 50.57% to a maximum of 61.08%. Further increase in S/C ratio from 1.4 to 2 tends to gradually decrease the net plant efficiency from 61.08% to 52.07% due to the increase in consumption/burning of produced syngas from 50.76% to 56.87%, respectively. Therefore, S/C of 1.4 within the gasifier is chosen as the optimal ratio for all the cases [<a href="#16" title="16">16</a>].</p> <a onclick="openimage('https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-syngas-25262-g005.png','','scrollbars=yes,resizable=yes,width=500,height=330')" class="thumbnail"> <img src="https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-syngas-25262-g005.png" class="img-thumbnail img-fluid d-block mx-auto" alt="Thermodynamics-Catalysis" title="Thermodynamics-Catalysis" /> </a> <p><strong>Figure 5:</strong> Effect of S/C on total syngas produced/burnt (kg/ h) and net plant efficiency (%).</p> <p><strong>Table 6</strong> compares the optimal results from the 11 different cases with various feed ratios. The comparison was based on the cogasification of 100 kg/h of feed mixture to produce syngas with H<sub>2</sub>/CO ratio of 2 while supplying process heat by burning a portion of the produced syngas [<a href="#17" title="17">17</a>].</p> <p> Table 6 shows that when RH concentration rises, less steam and CO<sub>2</sub> are needed for gasification and reforming since there is less carbon in the feed mixture. Further, the concentration of O<sub>2</sub> in the feed mixture also increases as a result of the increase in RH weight percent, which tends to partially oxidize and reform the hydrocarbons and char, thereby reducing the demand for steam and CO<sub>2</sub> as oxidizing agents. Further it can also be observed from the <strong>Table 6</strong> and <strong>Figure 6</strong> that with the increase in HDPE weight% in the feed mixture (or decrease in weight% of RH) the amount of syngas produced is increased due to the higher carbon content in feed which is in agreement with the results reported by Chai, et al. [<a href="#3" title="3">3</a>,<a href="#18" title="18">18</a>]. Air compression requires the majority of the process power, followed by syngas compression and CO<sub>2</sub> separation. Results also show that the power needed for CO<sub>2</sub> compression rises with an increase in RH weight percent because more CO<sub>2</sub> is produced during the gasification stage due to an increase in intrinsic O<sub>2</sub> content in the feed. Almost the same amount of power was required for crushing RH and HDPE in each case. The amount of water pumped for washing HDPE and HP steam generation was found to be decreasing with an increase in RH weight percent. The energy required for sulphur removal was also found to be decreasing with the increase in RH weight percent due to the lower sulphur content of RH compared to HDPE [<a href="#11" title="11">11</a>]. Further, it was observed that increase in the weight% of RH in the feed mixture resulted in decrease in the amount of syngas production and amount of syngas burnt to meet the process heat demand. However, it was also observed that a rise in RH weight percent in feed was inversely proportional to the fraction produced syngas that was burnt. Approximately 50% of the produced syngas was burnt in case of pure HDPE, compared to 60% in case of pure RH [<a href="#12" title="12">12</a>]. <strong>Table 6</strong> also shows that more than 90% of the captured CO<sub>2</sub> was recycled back for co-gasification, demonstrating the efficacy of the proposed process to utilize CO<sub>2</sub>. However, as the HDPE content in the feed mixture drops, the CO<sub>2</sub> utilization is found to decline, and it falls to just 11% in the case of pure RH. Finally, the net <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/power-generation-27063.html'>power generation</a> and net plant efficiency tend to decrease with the increase in RH content in the feed mixture. The overall plant efficiency was found to be highest at 68% in case of pure HDPE which decreased to almost half <em>i.e.,</em> 35% in case of pure RH, due to the high ash content of the RH in comparison to no ash content in case of HDPE [<a href="#19" title="19">19</a>,<a href="#20" title="20">20</a>].</p> <div class="table-responsive"> <table class="table table-striped"> <thead> <tr> <th rowspan="2">Parameters</th> <th rowspan="2">Units</th> <th colspan="11">Composition of <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>rice</a> husk with HDPE</th> </tr> <tr> <th>Case 1</th> <th>Case 2</th> <th>Case 3</th> <th>Case 4</th> <th>Case 5</th> <th>Case 6</th> <th>Case 7</th> <th>Case 8</th> <th>Case 9</th> <th>Case 10</th> <th>Case 11</th> </tr> </thead> <tbody> <tr> <td>RH flowrate</td> <td rowspan="5">kg/h</td> <td>0</td> <td>10</td> <td>20</td> <td>30</td> <td>40</td> <td>50</td> <td>60</td> <td>70</td> <td>80</td> <td>90</td> <td>100</td> </tr> <tr> <td>HDPE flowrate</td> <td>100</td> <td>90</td> <td>80</td> <td>70</td> <td>60</td> <td>50</td> <td>40</td> <td>30</td> <td>20</td> <td>10</td> <td>0</td> </tr> <tr> <td>Steam to gasifier</td> <td>121.3</td> <td>109.7</td> <td>98.1</td> <td>86.8</td> <td>79.6</td> <td>73.7</td> <td>67.9</td> <td>62</td> <td>56.2</td> <td>50.3</td> <td>50</td> </tr> <tr> <td>Steam to reformer</td> <td>27.3</td> <td>30.4</td> <td>33.5</td> <td>36.3</td> <td>35</td> <td>32.4</td> <td>29.7</td> <td>27.1</td> <td>24.4</td> <td>21.8</td> <td>13.6</td> </tr> <tr> <td>CO<sub>2</sub> to reformer</td> <td>31.6</td> <td>29</td> <td>26.4</td> <td>23.8</td> <td>21.1</td> <td>18.5</td> <td>15.9</td> <td>13.2</td> <td>10.6</td> <td>8</td> <td>5.3</td> </tr> <tr> <td colspan="13"><strong>Reformer gas mass flow</strong></td> </tr> <tr> <td>C</td> <td rowspan="13">kg/h</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> </tr> <tr> <td>CH<sub>4</sub></td> <td>0.6</td> <td>0.5</td> <td>0.4</td> <td>0.3</td> <td>0.2</td> <td>0.2</td> <td>0.1</td> <td>0.1</td> <td>0.1</td> <td>0</td> <td>0</td> </tr> <tr> <td>H<sub>2</sub></td> <td>27.5</td> <td>25.5</td> <td>23.5</td> <td>21.6</td> <td>19.6</td> <td>17.6</td> <td>15.6</td> <td>13.6</td> <td>11.6</td> <td>9.6</td> <td>7.6</td> </tr> <tr> <td>CO</td> <td>191.1</td> <td>177.4</td> <td>163.6</td> <td>149.8</td> <td>136</td> <td>122.1</td> <td>108.3</td> <td>94.4</td> <td>80.5</td> <td>66.5</td> <td>52.6</td> </tr> <tr> <td>CO<sub>2</sub></td> <td>35</td> <td>36.3</td> <td>37.5</td> <td>38.8</td> <td>40.1</td> <td>41.4</td> <td>42.7</td> <td>44</td> <td>45.3</td> <td>46.6</td> <td>48</td> </tr> <tr> <td>H<sub>2</sub>O</td> <td>31</td> <td>32.1</td> <td>33.2</td> <td>34.3</td> <td>35.5</td> <td>36.6</td> <td>37.8</td> <td>38.9</td> <td>40.1</td> <td>41.2</td> <td>42.4</td> </tr> <tr> <td>O<sub>2</sub></td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> </tr> <tr> <td>N<sub>2</sub></td> <td>0.1</td> <td>0.2</td> <td>0.2</td> <td>0.2</td> <td>0.2</td> <td>0.3</td> <td>0.3</td> <td>0.3</td> <td>0.4</td> <td>0.4</td> <td>0.4</td> </tr> <tr> <td>NO<sub>2</sub></td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> </tr> <tr> <td>NO</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> </tr> <tr> <td>S</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> </tr> <tr> <td>SO<sub>2</sub></td> <td>0.12</td> <td>0.12</td> <td>0.11</td> <td>0.1</td> <td>0.09</td> <td>0.08</td> <td>0.07</td> <td>0.05</td> <td>0.04</td> <td>0.03</td> <td>0.02</td> </tr> <tr> <td>SO<sub>3</sub></td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> </tr> <tr> <td colspan="13"><strong>Power/energy requirement</strong></td> </tr> <tr> <td>Crushing</td> <td rowspan="6">kW</td> <td>0.1</td> <td>0.1</td> <td>0.1</td> <td>0.1</td> <td>0.1</td> <td>0.1</td> <td>0.1</td> <td>0.1</td> <td>0.1</td> <td>0.1</td> <td>0.1</td> </tr> <tr> <td>Pumping water</td> <td>0.4</td> <td>0.4</td> <td>0.4</td> <td>0.4</td> <td>0.3</td> <td>0.3</td> <td>0.3</td> <td>0.3</td> <td>0.2</td> <td>0.2</td> <td>0.2</td> </tr> <tr> <td>SG compressor</td> <td>32.1</td> <td>29.8</td> <td>27.5</td> <td>25.1</td> <td>22.8</td> <td>20.5</td> <td>18.2</td> <td>15.8</td> <td>13.5</td> <td>11.2</td> <td>8.8</td> </tr> <tr> <td>Air compressor</td> <td>100.7</td> <td>94</td> <td>87.3</td> <td>80.6</td> <td>73.9</td> <td>67.1</td> <td>60.4</td> <td>53.7</td> <td>46.9</td> <td>40.2</td> <td>33.4</td> </tr> <tr> <td>SG cleaning</td> <td>0.18</td> <td>0.17</td> <td>0.15</td> <td>0.14</td> <td>0.12</td> <td>0.11</td> <td>0.09</td> <td>0.08</td> <td>0.06</td> <td>0.04</td> <td>0.03</td> </tr> <tr> <td>CO<sub>2</sub> separation from SG</td> <td>37.9</td> <td>39.3</td> <td>40.6</td> <td>42</td> <td>43.4</td> <td>44.8</td> <td>46.2</td> <td>47.6</td> <td>49.1</td> <td>50.5</td> <td>51.9</td> </tr> <tr> <td colspan="13"><strong>Power generated</strong></td> </tr> <tr> <td>Gas turbine</td> <td rowspan="2">kW</td> <td>307.2</td> <td>286.8</td> <td>266.4</td> <td>246</td> <td>225.5</td> <td>205</td> <td>184.5</td> <td>163.9</td> <td>143.4</td> <td>122.8</td> <td>102.2</td> </tr> <tr> <td>Steam turbine</td> <td>36.7</td> <td>34.7</td> <td>32.6</td> <td>30.6</td> <td>28.5</td> <td>26.4</td> <td>24.4</td> <td>22.3</td> <td>20.3</td> <td>18.2</td> <td>16.1</td> </tr> <tr> <td colspan="13"><strong>SG details</strong></td> </tr> <tr> <td>Total SG produced</td> <td rowspan="2">kg/h</td> <td>219.2</td> <td>203.4</td> <td>187.5</td> <td>171.7</td> <td>155.8</td> <td>139.9</td> <td>124</td> <td>108</td> <td>92.1</td> <td>76.1</td> <td>60.2</td> </tr> <tr> <td>SG burnt</td> <td>108.6</td> <td>101.5</td> <td>94.3</td> <td>87.1</td> <td>79.8</td> <td>72.6</td> <td>65.4</td> <td>58.1</td> <td>50.8</td> <td>43.5</td> <td>36.2</td> </tr> <tr> <td>Fraction of SG burnt</td> <td>%</td> <td>49.6</td> <td>49.9</td> <td>50.3</td> <td>50.7</td> <td>51.3</td> <td>51.9</td> <td>52.7</td> <td>53.8</td> <td>55.2</td> <td>57.2</td> <td>60.2</td> </tr> <tr> <td>SG stored</td> <td>kg/h</td> <td>110.6</td> <td>101.9</td> <td>93.3</td> <td>84.6</td> <td>75.9</td> <td>67.3</td> <td>58.6</td> <td>49.9</td> <td>41.3</td> <td>32.6</td> <td>23.9</td> </tr> <tr> <td>CO<sub>2</sub> utilization</td> <td>%</td> <td>90.4</td> <td>80</td> <td>70.3</td> <td>61.2</td> <td>52.7</td> <td>44.7</td> <td>37.2</td> <td>30.1</td> <td>23.4</td> <td>17.1</td> <td>11.1</td> </tr> <tr> <td>H<sub>2</sub>/CO</td> <td>&nbsp;</td> <td>2</td> <td>2</td> <td>2</td> <td>2</td> <td>2</td> <td>2</td> <td>2</td> <td>2</td> <td>2</td> <td>2</td> <td>2</td> </tr> <tr> <td>LHV of SG stored</td> <td rowspan="4">kW</td> <td>733</td> <td>675.9</td> <td>618.7</td> <td>561.4</td> <td>504.1</td> <td>446.7</td> <td>389.3</td> <td>331.7</td> <td>274.2</td> <td>216.6</td> <td>159</td> </tr> <tr> <td>Total amount of power/energy required</td> <td>171.4</td> <td>163.7</td> <td>156</td> <td>148.4</td> <td>140.7</td> <td>133</td> <td>125.3</td> <td>117.6</td> <td>109.9</td> <td>102.2</td> <td>94.6</td> </tr> <tr> <td>Total power generated</td> <td>343.9</td> <td>321.5</td> <td>299</td> <td>276.5</td> <td>254</td> <td>231.4</td> <td>208.8</td> <td>186.2</td> <td>163.6</td> <td>141</td> <td>118.3</td> </tr> <tr> <td>Net power generated</td> <td>172.5</td> <td>157.7</td> <td>143</td> <td>128.2</td> <td>113.3</td> <td>98.4</td> <td>83.5</td> <td>68.6</td> <td>53.7</td> <td>38.7</td> <td>23.8</td> </tr> <tr> <td>Net plant efficiency</td> <td>%</td> <td>68.4</td> <td>67.1</td> <td>65.6</td> <td>63.9</td> <td>61.8</td> <td>59.4</td> <td>56.5</td> <td>53</td> <td>48.6</td> <td>43</td> <td>35.7</td> </tr> </tbody> </table> </div> <p><strong>Table 6:</strong> Performance comparison for syngas production.</p> <a onclick="openimage('https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-efficiency-25262-g006.png','','scrollbars=yes,resizable=yes,width=500,height=330')" class="thumbnail"> <img src="https://www.longdom.org/articles-images-2023/Thermodynamics-Catalysis-efficiency-25262-g006.png" class="img-thumbnail img-fluid d-block mx-auto" alt="Thermodynamics-Catalysis" title="Thermodynamics-Catalysis" /> </a> <p><strong>Figure 6:</strong> Effect of feed composition on net plant efficiency and syngas composition.</p> <h4>Conclusion</h4> <p> Thermodynamic models for the co-gasification of <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>Rice</a> Husk (RH) and High-Density Polyethylene (HDPE) with a Carbon Capture and Utilization (CCU) system was developed using ASPEN Plus for the generation of syngas with H<sub>2</sub>/CO ratio of 2. The integrated system was made self-sustainable by adding heat recovery and steam generation and power generation section to meet the process steam and power requirements. The heat demand of the gasifier and reformer is met by burning a fraction of the produced syngas. Sequential parametric sensitivity analysis performed for the case of 50% RH and HDPE showed that complete carbon conversion to syngas within the gasifier can be attained at Steam to Carbon (S/C) ratio of 1.2. However, the net plant efficiency was found to be maximizing at S/C ratio of 1.4. Further the comparative analysis of the 11 different co-gasification cases revealed that the increase in weight percent of RH in feed mixture, resulted in lower carbon content, but higher O<sub>2</sub> and ash content during gasification which resulted in</p> <p>&bull; Decrease in process steam and CO<sub>2</sub> demand.<br /> &bull; Decrease in amount of syngas produced.<br /> &bull; Increase in fraction of produced syngas that was burnt to meet process heat demand.<br /> &bull; Decrease in utilization of the captured CO<sub>2</sub>.<br /> &bull; Decrease in net <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/power-generation-27063.html'>power generation</a> and net plant efficiency.</p> <p> Due to the high ash concentration of the RH in comparison to the absence of ash content in the case of HDPE, the total plant efficiency was found to be at its best in the case of pure HDPE at 68% and decreased to practically half (35%), in the case of pure RH.</p> <h4>Acknowledgments</h4> <p> The authors are grateful to the Director, CSIR-Indian Institute of Chemical Technology, for providing a platform and facilities for carrying out the research. The authors also would like to acknowledge the financial support of Council of Scientific and Industrial Research, India RA Fellowship (Award No. 31/0014(13248)/2022-EMR-I).</p> <h4>References</h4> <ol> <li id='Reference_Title_Link' value='1'><a name="1" id='1'></a>Alam S, Chenna S. <a href="https://onlinelibrary.wiley.com/doi/abs/10.1002/er.7396">Greener process for syngas cogeneration: Bi-reforming of methane coupled with chemical looping combustion</a>. Int J Energy Res. 2022;46(3):3476-3489. <p>[<a href="https://doi.org/10.1002/er.7396">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=4541453094214408223&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='2'><a name="2" id='2'></a>Barontini F, Frigo S, Gabbrielli R, Sica P. <a href="https://www.sciencedirect.com/science/article/abs/pii/S0196890421007421">Co-gasification of woody biomass with organic and waste matrices in a down draft gasifier: An experimental and modeling approach</a>. Energy Convers Manag. 2021;245:114566. <p>[<a href="https://doi.org/10.1016/j.enconman.2021.114566">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=1497740280309344375&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>] </p> </li> <li id='Reference_Title_Link' value='3'><a name="3" id='3'></a>Chai Y, Packham N, Wang M. <a href="https://www.sciencedirect.com/science/article/pii/S001623612201420X">Process improvement analysis of pyrolysis/gasification of biomass and waste plastics with carbon capture and utilisation through process simulation</a>. Fuel. 2022;324:124571. <p>[<a href="https://doi.org/10.1016/j.fuel.2022.124571">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=15016493484631852878&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='4'><a name="4" id='4'></a>CPCB. <a href="https://cpcb.nic.in/displaypdf.php?id=cGxhc3RpY3dhc3RlL1BXXzYwX2NpdGllc19yZXBvcnQtSmFuLTIwMTUucGRm">Assessment and characterisation of plastic waste generation in 60 major Cities</a>. Central <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/pollution-control-17023.html'>Pollution Control</a> Board (CPCB) ministry of environment, Forest and climate change. 2015.</li> <li id='Reference_Title_Link' value='5'><a name="5" id='5'></a>Gunukula S, Tran DT. <a href="https://onlinelibrary.wiley.com/doi/abs/10.1002/bbb.2307">Modeling and economic analysis of biomass and plastic conversion to power</a>. <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/biofuel-11967.html'>Biofuel</a> Bioprod Biorefin. 2022;16(1):81-90. <p>[<a href="https://doi.org/10.1002/bbb.2307">Crossref</a>] [<a href="https://scholar.google.com/scholar?hl=en&amp;as_sdt=0%2C5&amp;q=Modeling+and+economic+analysis+of+biomass+and+plastic+conversion+to+power&amp;btnG=">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='6'><a name="6" id='6'></a>Iqbal N, Agrawal A, Dubey S, Kumar J. <a href="https://www.intechopen.com/chapters/73709">Role of decomposers in agricultural waste management</a>. InBiotechnological applications of biomass. IntechOpen. 2020. <p>[<a href="DOI:%2010.5772/intechopen.93816">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=8481361415431236690&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='7'><a name="7" id='7'></a>Kalair AR, Seyedmahmoudian M, Stojcevski A, Abas N, Khan N. <a href="https://www.cell.com/heliyon/fulltext/S2405-8440(21)02258-1?_returnURL=https%3A%2F%2Flinkinghub.elsevier.com%2Fretrieve%2Fpii%2FS2405844021022581%3Fshowall%3Dtrue">Waste to <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/energy-conversion-11032.html'>energy conversion</a> for a sustainable future</a>. Heliyon. 2021;7(10):e08155. <p>[<a href="https://doi.org/10.1016/j.heliyon.2021.e08155">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=8530812351828408031&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>] [<a href="https://pubmed.ncbi.nlm.nih.gov/34729426/">PubMed</a>]</p> </li> <li id='Reference_Title_Link' value='8'><a name="8" id='8'></a>Kalak T. <a href="https://www.mdpi.com/1996-1073/16/4/1783">Potential use of industrial biomass waste as a sustainable energy source in the future</a>. Energies. 2023;16(4):1783. <p>[<a href="https://doi.org/10.3390/en16041783">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=5571762404105254987&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='9'><a name="9" id='9'></a>Li H, Aguirre-Villegas HA, Allen RD, Bai X, Benson CH, Beckham GT, et al. <a href="https://www.sciencedirect.com/org/science/article/pii/S1463926223000018">Expanding plastics <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/recycling-3936.html'>recycling</a> technologies: Chemical aspects, technology status and challenges</a>. Green Chem. 2022. <p>[<a href="https://www.sciencedirect.com/org/science/article/pii/S1463926223000018">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=9869505924067020387&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='10'><a name="10" id='10'></a>Lopez-Fernandez A, Bolonio D, Amez I, Castells B, Ortega MF, Garcia-Martinez MJ. <a href="https://www.mdpi.com/1996-1073/14/19/6035">Design and pinch analysis of a GFT process for production of biojet <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/fuel-22119.html'>fuel</a> from biomass and plastics</a>. Energies. 2021;14(19):6035. <p>[<a href="https://doi.org/10.3390/en14196035">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=14110927624604557894&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='11'><a name="11" id='11'></a>Mazzoni L, Janajreh I. <a href="https://www.sciencedirect.com/science/article/pii/S0360319917323406">Plasma gasification of municipal solid waste with variable content of plastic solid waste for enhanced energy recovery</a>. Int J Hydrog Energy. 2017;42(30):19446-19457. <p>[<a href="https://doi.org/10.1016/j.ijhydene.2017.06.069">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=10782651983780547368&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='12'><a name="12" id='12'></a>Ouazzani WT, El Farissi L, Monteiro E, Rouboa A. <a href="https://www.sciencedirect.com/science/article/pii/S2352484723000859">Automotive plastic waste and <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/olive-21612.html'>olive</a> pomace valorization using the pyrolysis process</a>. Energy Rep. 2022;8:1577-1586. <p>[<a href="https://doi.org/10.1016/j.egyr.2023.01.077">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=13143371144194180139&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='13'><a name="13" id='13'></a>Pode R. <a href="https://www.sciencedirect.com/science/article/abs/pii/S1364032115010217">Potential applications of <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>rice</a> husk ash waste from <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>rice</a> husk biomass power plant</a>. Renew Sust Energ Rev. 2016;53:1468-1485. <p>[<a href="https://doi.org/10.1016/j.rser.2015.09.051">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=15207602671511476719&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='14'><a name="14" id='14'></a>Prasad M, Ranjan R, Ali A, Goyal D, Yadav A, Singh TB, et al. <a href="https://link.springer.com/chapter/10.1007/978-3-030-41552-5_13">Efficient transformation of agricultural waste in India</a>. Contaminants in Agriculture: Sources, Impacts and Management. 2020:271-287. <p>[<a href="https://doi.org/10.1007/978-3-030-41552-5_13">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=2877349682051522306&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='15'><a name="15" id='15'></a>Ramos A, Tavares R, Rouboa A. <a href="https://pubs.aip.org/aip/acp/article-abstract/1968/1/020016/727137/Microplastics-co-gasification-with-biomass">Microplastics co-gasification with biomass: Modelling syngas characteristics at low temperatures</a>. InAIP Conference Proceedings. 2018;1968(1). <p>[<a href="https://doi.org/10.1063/1.5039175">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=12374751697635944739&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='16'><a name="16" id='16'></a>Rosha P, Kumar S, Vikram S, Ibrahim H, Ala'a H. <a href="https://www.sciencedirect.com/science/article/abs/pii/S0360319921044815">H<sub>2</sub> enriched gaseous <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/fuel-22119.html'>fuel</a> production <em>via</em> co-gasification of an algae-plastic waste mixture using Aspen PLUS</a>. Int J Hydrog Eng. 2022;47(62):26294-26302. <p>[<a href="https://doi.org/10.1016/j.ijhydene.2021.11.092">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=595780938370838930&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>] </p> </li> <li id='Reference_Title_Link' value='17'><a name="17" id='17'></a>Salisu J, Gao N, Quan C. <a href="https://www.sciencedirect.com/science/article/abs/pii/S0165237021001431">Techno-economic assessment of co-gasification of <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>rice</a> husk and plastic waste as an off-grid power source for small scale <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/rice-52561.html'>rice</a> milling-an Aspen Plus model</a>. J Anal Appl Pyrolysis. 2021;158:105157. <p>[<a href="https://doi.org/10.1016/j.jaap.2021.105157">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=14539084994630689803&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='18'><a name="18" id='18'></a>Singh M, Salaudeen SA, Gilroyed BH, Dutta A. <a href="https://www.sciencedirect.com/science/article/pii/S0016236122005725">Simulation of biomass-plastic co-gasification in a <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/fluidized-bed-44572.html'>fluidized bed</a> reactor using Aspen plus</a>. Fuel. 2022;319:123708. <p>[<a href="https://doi.org/10.1016/j.fuel.2022.123708">Crossref</a>] [<a href="https://scholar.google.com/scholar?hl=en&amp;as_sdt=0%2C5&amp;q=Simulation+of+biomass-plastic+co-gasification+in+a+fluidized+bed+reactor+using+Aspen+plus&amp;btnG=">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='19'><a name="19" id='19'></a>Tavares R, Ramos A, Rouboa A. <a href="https://www.sciencedirect.com/science/article/abs/pii/S0196890418300979">Microplastics thermal treatment by polyethylene terephthalate-biomass gasification</a>. Energy Convers Manag. 2018;162:118-131. <p>[<a href="https://doi.org/10.1016/j.enconman.2018.02.001">Crossref</a>] [<a href="https://scholar.google.com/scholar?cluster=9094440350217189683&amp;hl=en&amp;as_sdt=0,5">Google Scholar</a>]</p> </li> <li id='Reference_Title_Link' value='20'><a name="20" id='20'></a>Tian Y, Luo Z, He D, Yang Y, Liang S, Liu W, Yuan L. <a href="https://link.springer.com/article/10.1007/s13399-022-02848-9">Co-gasification of biomass and polyethylene: A <a target='_blank' href='https://www.longdom.org/peer-reviewed-journals/simulation-28705.html'>simulation</a> study by considering tar formation</a>. Biomass Convers Biorefin. 2022:1-9. <p>[<a href="https://scholar.google.com/scholar?hl=en&amp;as_sdt=0%2C5&amp;q=Co-gasification+of+biomass+and+polyethylene%3A+a+simulation+study+by+considering+tar+formation&amp;btnG=">Google Scholar</a>]</p> </li> </ol> <!----------for extracted references-------> <!-------------------------------> <div class="card bg-light mb-3"> <div class="card-body px-3 pb-0"> <h4 class="font-size-4"><a id="ai"></a>Author Info</h4> <a href='https://www.longdom.org/author/pathipaka-sravani-67299' title='Pathipaka Sravani' style='color:#555; border-bottom:1px dotted #CCC;'>Pathipaka Sravani</a><sup><a href='#a1'>1</a></sup>, <a href='https://www.longdom.org/author/sangeetha-povari-67300' title='Sangeetha Povari' style='color:#555; border-bottom:1px dotted #CCC;'>Sangeetha Povari</a><sup><a href='#a1'>1</a></sup>, <a href='https://www.longdom.org/author/shadab-alam-67302' title='Shadab Alam' style='color:#555; border-bottom:1px dotted #CCC;'>Shadab Alam</a><sup><a href='#a1'>1</a></sup><sup><a href='#Shadab_Alam'>*</a></sup>, <a href='https://www.longdom.org/author/lingaiah-nakka-67303' title='Lingaiah Nakka' style='color:#555; border-bottom:1px dotted #CCC;'>Lingaiah Nakka</a><sup><a href='#a2'>2</a></sup>, <a href='https://www.longdom.org/author/surananai-srinath-67305' title='Surananai Srinath' style='color:#555; border-bottom:1px dotted #CCC;'>Surananai Srinath</a><sup><a href='#a3'>3</a></sup> and <a href='https://www.longdom.org/author/sumana-chenna-67306' title='Sumana Chenna' style='color:#555; border-bottom:1px dotted #CCC;'>Sumana Chenna</a><sup><a href='#a1'>1</a></sup><sup><a href='#Sumana_Chenna'>*</a></sup> <div>&nbsp;</div> <a id="a1"></a><sup>1</sup>Department of Engineering and Technology Transfer, CSIR-Indian Institute of Chemical Technology, Hyderabad, India<br> <a id="a2"></a><sup>2</sup>Department of Catalysis and Fine Chemical, CSIR-Indian Institute of Chemical Technology, Hyderabad, India<br> <a id="a3"></a><sup>3</sup>Department of Chemical Engineering, National Institute of Technology, Warangal, Telangana, India<br> <div>&nbsp;</div> <p><strong>Citation:</strong> Sravani P, Povari S, Alam S, Nakka L, Srinath S, Chenna S (2024) Co-gasification of Waste Biomass and Plastic for Syngas Production with CO<sub>2</sub> Capture and Utilization: Thermodynamic Investigation. J Thermodyn Catal. 15:379.</p> <p> <strong>Received: </strong>23-Jun-2023, Manuscript No. JTC-23-25262; <strong>Editor assigned: </strong>26-Jun-2023, Pre QC No. JTC-23-25262 (PQ); <strong>Reviewed: </strong>10-Jul-2023, QC No. JTC-23-25262; <strong>Revised: </strong>05-Mar-2024, Manuscript No. JTC-23-25262 (R); <strong>Published:</strong> 12-Mar-2024 , DOI: 10.35248/2157-7544.24.15.379</p> <p><strong>Copyright: </strong>漏 2024 Sravani P, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.</p> </div> </div> </div> </div> </div> </section> <footer class="bg-blue-grey-900 py-3"> <div class="container"> <div class="row"> <div class="col-12 col-sm-4"> <h4 class="white font-size-4 fweight-400 border-bottom-1 pb-2">Content Links</h4> <ul class="list-unstyled footer-links font-size-3"> <li><a class="" href="https://www.longdom.org/online-tools.html" title="Click here">Tools</a> </li> <li><a class="" href="https://www.longdom.org/feedback.html" title="Click here">Feedback</a></li> <li><a class="" href="https://www.longdom.org/careers.html" title="Click here">Careers</a></li> <li><a class="" href="https://www.longdom.org/privacy-policy.html" title="Click here">Privacy Policy</a></li> <li><a class="" href="https://www.longdom.org/terms-conditions.html" title="Click here">Terms &amp; Conditions</a></li> <li><a class="" href="https://www.longdom.org/authors-reviewers-editors.html" title="Click here">Authors, Reviewers &amp; Editors</a></li> </ul> </div> <div class="col-12 col-sm-4"> <h4 class="white font-size-4 fweight-400 border-bottom-1 pb-2">Contact Longdom</h4> <p>Longdom Group SA<br> Avenue Roger Vandendriessche,<br> 18, 1150 Brussels, Belgium<br> Phone: +442038085340 <br><strong>Email:</strong> <a href="mailto:info@longdom.org" class="white" title="Click here">info@longdom.org</a></p> </div> <div class="col-12 col-sm-4"> <h4 class="white font-size-4 fweight-400 border-bottom-1 pb-2">Connect</h4> <nav class="nav nav-pills social-icons-footer flex-column a-pl-0"> <a href="https://www.facebook.com/longdompublisher" title="Click here" target="_blank" class="nav-link bg-facebook-hover"><i class="fab fa-facebook-f bg-facebook"></i> Facebook</a> <a href="https://www.linkedin.com/company/longdom-publishing-sl/" title="Click here" target="_blank" class="nav-link bg-linkedin-hover"><i class="fab fa-linkedin-in bg-linkedin"></i> Linkedin</a> <a href="https://twitter.com/LongdomP" title="Click here" target="_blank" class="nav-link bg-twitter-hover"><i class="fab fa-twitter bg-twitter"></i> Twitter</a> <a href="https://www.instagram.com/longdom_publisher/" title="Click here" target="_blank" class="nav-link bg-instagram-hover"><i class="fab fa-instagram bg-instagram"></i> Instagram</a> </nav> </div> </div> <div class="row text-center"> <div class="col"> <p>Copyright &copy; 2024 <a href="https://www.longdom.org/" title="Click here" class="white">Longdom Publishing</a>.</p> </div> </div> </div> </footer> <!--========================== Scroll To Top ============================--> <a href="#0" class="cd-top js-cd-top">Top</a> <!-- Optional JavaScript --> <!-- jQuery first, then Popper.js, then Bootstrap JS --> <script defer src="https://code.jquery.com/jquery-3.3.1.min.js"></script> <script defer src="https://cdnjs.cloudflare.com/ajax/libs/popper.js/1.14.7/umd/popper.min.js"></script> <script defer src="https://stackpath.bootstrapcdn.com/bootstrap/4.3.1/js/bootstrap.min.js"></script> <!--Get the app icon js--> <script> jQuery(function($) { $(window).scroll(function fix_element() { $('#target').css( $(window).scrollTop() > 100 ? { 'position': 'fixed', 'top': '440px' } : { 'position': 'absolute', 'top': '440px' } ); return fix_element; }()); }); </script> <!--Get the app icon js end--> <!--========================== Feather Icons ============================--> <script defer src="https://unpkg.com/feather-icons"></script> <script> feather.replace() </script> <!--========================== Scroll To Top ============================--> <script defer src="/assets/js/scroll-to-top.js"></script> <!--========================== mCustomScrollbar ============================--> <script defer type="text/javascript" src="/assets/js/coolautosuggest.js"></script> <script language="javascript" type="text/javascript"> $("#keyword").coolautosuggest({ url: "https://www.longdom.org/author-names.php?chars=", minChars: 3, }); </script> <script defer src="/assets/js/jquery.mCustomScrollbar.concat.min.js"></script> <script> // Scrollbar var Scrollbar = function() { "use strict"; // Handle Scrollbar Linear var handleScrollbarLinear = function() { $(".scrollbar").mCustomScrollbar({ theme: "minimal-dark" }); } return { init: function() { handleScrollbarLinear(); // initial setup for scrollbar linear } } }(); $(document).ready(function() { Scrollbar.init(); }); /*========================== Stikcy Navbar ============================*/ window.onscroll = function() { myFunction() }; var navbar = document.getElementById("sticky-navbar"); var sticky = navbar.offsetTop; function myFunction() { if (window.pageYOffset >= sticky) { navbar.classList.add("sticky") } else { navbar.classList.remove("sticky"); } } /*========================== Bootstrap Popover ============================*/ $(function () { $('[data-toggle="popover"]').popover() }) </script> <!--========================== Page Scroll to ID ============================--> <script defer src="/assets/js/jquery.malihu.PageScroll2id.min.js"></script> <script> (function($){ $(window).on("load",function(){ $("a[rel='m_PageScroll2id']").mPageScroll2id(); }); })(jQuery); </script> <!--========================== Equal Height ============================--> <script defer type="text/javascript" src="/assets/js/jquery.matchHeight-min.js"></script> <script> $(function() { $('.match-height').matchHeight({ byRow: true, property: 'height', target: null, }); }); </script> <script defer type="text/javascript" src="/assets/js/grids.min.js"></script> <script type="text/javascript"> // Equal Height var EqualHeight = function() { "use strict"; // Handle Equal Height var handleEqualHeight = function() { $(function($) { $('.equal-height').responsiveEqualHeightGrid(); }); } return { init: function() { handleEqualHeight(); // initial setup for equal height } } }(); $(document).ready(function() { EqualHeight.init(); }); </script> <!--================ Select Picker ==================--> <script defer src="https://cdnjs.cloudflare.com/ajax/libs/bootstrap-select/1.13.2/js/bootstrap-select.min.js"></script> <script> $('.selectpicker').selectpicker(); </script> <script> $(document).ready(function(){ var filecount = 1; $('.filerowclass').each(function(){ var countattr = $(this).attr('countattr'); if(filecount == countattr){ var countlink = $('#rowfile'+countattr+ ' .filelinkclass').length; if(countlink == 0){ $('#rowfile'+countattr).remove(); } } filecount++; }); }); </script> <!------onspot search----> <script type="text/javascript"> $(document).ready(function() { $("#wait").hide(); $("#jkeyword").keyup(function() { $("#wait").show(); //values of sending variables var jkeyword=$("#jkeyword").val(); var dataString = { 'jkeyword':jkeyword }; $.ajax ({ type: "POST", url: "https://www.longdom.org/journal-search.php", data: dataString, cache: false, success: function(html) { $("#jresult").html(html); $("#wait").hide(); } }); }); }); </script> <script type="text/javascript">function add_chatinline(){var hccid=75174750;var nt=document.createElement("script");nt.async=true;nt.src="https://mylivechat.com/chatinline.aspx?hccid="+hccid;var ct=document.getElementsByTagName("script")[0];ct.parentNode.insertBefore(nt,ct);} add_chatinline(); </script> <link href="https://cdn.jsdelivr.net/npm/select2@4.1.0-rc.0/dist/css/select2.min.css" rel="stylesheet" /> <script defer src="https://cdn.jsdelivr.net/npm/select2@4.1.0-rc.0/dist/js/select2.min.js"></script> </body> </html>

Pages: 1 2 3 4 5 6 7 8 9 10