<?xml version="1.0" encoding="UTF-8"?> <references> <reference> <a1>Sgobba, Stefano</a1> <t1>Materials for high vacuum technology, an overview</t1> <t2/> <sn/> <op/> <vo/> <ab>In modern accelerators stringent requirements are placed on materials of vacuum systems. Their physical and mechanical properties, machinability, weldability or brazeability are key parameters. Adequate strength, ductility, magnetic properties at room as well as low temperatures are important factors for vacuum systems of accelerators working at cryogenic temperatures, such as the Large Hadron Collider (LHC) under construction at CERN. In addition, baking or activation of Non-Evaporable Getters (NEG) at high temperatures impose specific choices of material grades of suitable tensile and creep properties in a large temperature range. Today, stainless steels are the dominant materials of vacuum constructions. Their metallurgy is extensively treated. The reasons for specific requirements in terms of metallurgical processes are detailed, in view of obtaining adequate purity, inclusion cleanliness, and fineness of the microstructure. In many cases these requirements are crucial to guarantee the final leak tightness of the vacuum components.</ab> <la>eng</la> <k1/> <pb>CERN</pb> <pp/> <yr>2007</yr> <ed/> <ul>http://documents.cern.ch/cgi-bin/setlink?base=preprint&amp;categ=cern&amp;id=ts-2006-004; http://documents.cern.ch/cgi-bin/setlink?base=yellowarticle&amp;categ=2007-003&amp;id=p117; http://cds.cern.ch/record/983744/files/p117.pdf; http://cds.cern.ch/record/983744/files/ts-2006-004.pdf; </ul> <no>Imported from Invenio.</no> </reference> </references>