TY - JFULL AU - Sundara Subramanian Karuppasamy and Che Hua Yang PY - 2021/2/ TI - Laser Ultrasonic Imaging Based on Synthetic Aperture Focusing Technique Algorithm T2 - International Journal of Civil and Environmental Engineering SP - 1 EP - 6 VL - 15 SN - 1307-6892 UR - https://publications.waset.org/pdf/10011745 PU - World Academy of Science, Engineering and Technology NX - Open Science Index 169, 2021 N2 - In this work, the laser ultrasound technique has been used for analyzing and imaging the inner defects in metal blocks. To detect the defects in blocks, traditionally the researchers used piezoelectric transducers for the generation and reception of ultrasonic signals. These transducers can be configured into the sparse and phased array. But these two configurations have their drawbacks including the requirement of many transducers, time-consuming calculations, limited bandwidth, and provide confined image resolution. Here, we focus on the non-contact method for generating and receiving the ultrasound to examine the inner defects in aluminum blocks. A Q-switched pulsed laser has been used for the generation and the reception is done by using Laser Doppler Vibrometer (LDV). Based on the Doppler effect, LDV provides a rapid and high spatial resolution way for sensing ultrasonic waves. From the LDV, a series of scanning points are selected which serves as the phased array elements. The side-drilled hole of 10 mm diameter with a depth of 25 mm has been introduced and the defect is interrogated by the linear array of scanning points obtained from the LDV. With the aid of the Synthetic Aperture Focusing Technique (SAFT) algorithm, based on the time-shifting principle the inspected images are generated from the A-scan data acquired from the 1-D linear phased array elements. Thus the defect can be precisely detected with good resolution. ER -