{"title":"Friction Stir Welding of Dissimilar Materials: An Overview","authors":"Mukuna P. Mubiayi, Esther T. Akinlabi","volume":76,"journal":"International Journal of Mechanical and Mechatronics Engineering","pagesStart":635,"pagesEnd":641,"ISSN":"1307-6892","URL":"https:\/\/publications.waset.org\/pdf\/14488","abstract":"Friction Stir Welding is a solid state welding technique which can be used to produce sound welds between similar and dissimilar materials. Dissimilar welds which include welds between the different series of aluminium alloys, aluminium to magnesium, steel and titanium has been successfully produced by many researchers. This review covers the work conducted in the above mentioned materials and further concludes by showing the need to fully understand the FSW process in order to expand the latter industrially.","references":"[1] W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Temple-\r\nSmith, C.J. Dawes, \"Friction stir Butt Welding\". International Patent\r\nNo. PCT\/GB92\/02203, 1991, GB patent application No. 9125978.8.\r\n[2] A. Scialpi, M. De Giorgi, L.A.C. De Filippis, R. Nobile, F.W. Panella,\r\n\"Mechanical analysis of ultra-thin friction stir welding joined sheets\r\nwith dissimilar and similar materials\", Materials and Design 29 (2008),\r\npp. 928-936.\r\n[3] Rajiv S. Mishra and Murray W. Mahoney, \"Friction Stir Welding and\r\nProcessing\", 2007, ASM international, the materials information society.\r\n[4] T. DebRoy and H. K. D. H. Bhadeshia, \"Friction stir welding of\r\ndissimilar alloys - a Perspective\", Science and Technology of Welding\r\nand Joining 2010, Vol 15 No 4, pp. 266- 270.\r\n[5] R. Rai, A. De, H. K. D. H. Bhadeshia and T. DebRoy, \"Review: friction\r\nstir welding tools\", Science and Technology of Welding and Joining,\r\n2011, Vol 16 No 4, pp. 325- 342.\r\n[6] M. Sivashanmugam, S. Ravikumar, T. Kumar, V. Seshagiri Rao, D.\r\nMuruganandam, \"A Review on Friction Stir Welding for Aluminum\r\nAlloys\", 978-1-4244-9082-0\/10\/$26.00 \u252c\u00ae2010 IEEE, pp. 216 - 221.\r\n[7] Z.Y. MA \"Friction Stir Processing Technology: A Review\"\r\nMetallurgical and Materials Transactions A, 2008, Vol. 39A, pp. 642 -\r\n658.\r\n[8] V. Soundararajan, M. Valant and R. Kovacevic, \"An Overview of R&D\r\nWork in FrictionStir Welding at SMU\"Association of Metallurgical\r\nEngineers of Serbia (AMES), pp. 276 - 295.\r\n[9] Bo Li, Yifu Shen, \"A feasibility research on friction stir welding of a\r\nnew-typed lap-butt joint of dissimilar Al alloys\" Materials and Design\r\n34 (2012) , pp. 725-731.\r\n[10] C. Leit\u251c\u00fao, R. Louro, D.M. Rodrigues, \" Analysis of high temperature\r\nplastic behaviour and its relation with weldability in friction stir welding\r\nfor aluminum alloys AA5083-H111 and AA6082-T6 Materials and\r\nDesign 37 (2012), pp. 402-409.\r\n[11] J. Guo, P. Gougeon, X.-G. Chen, \"Microstructure evolution and\r\nmechanical properties of dissimilar friction stir welded joints between\r\nAA1100-B4C MMC and AA6063 alloy\", Materials Science and\r\nEngineering A 553 (2012) 149- 156.\r\n[12] M. Koilraj, V. Sundareswaran, S. Vijayan, S.R. Koteswara Rao,\r\n\"Friction stir welding of dissimilar aluminum alloys AA2219 to AA5083\r\n- Optimization of process parameters using Taguchi technique\"\r\nMaterials and Design 42 (2012), pp. 1-7.\r\n[13] R. Palanivel, P. Koshy Mathews, N. Murugan, I. Dinaharan, \"Effect of\r\ntool rotational speed and pin profile on microstructure and tensile\r\nstrength of dissimilar friction stir welded AA5083-H111 and AA6351-\r\nT6 aluminum alloys\", Materials and Design 40 (2012) , pp. 7-16.\r\n[14] R. PalaniveI, P. Koshy Mathews, \"Mechanical and microstructural\r\nbehaviour of friction stir welded dissimilar aluminum alloy\", IEEEInternational\r\nConference On Advances In Engineering, Science And\r\nManagement (ICAESM -2012) March 30, 31, 2012, pp. 7- 11.\r\n[15] A.A.M. da Silva, E. Arruti, G. Janeiro, E. Aldanondo, P. Alvarez, A.\r\nEcheverria, \"Material flow and mechanical behaviour of dissimilar\r\nAA2024-T3 and AA7075-T6 aluminum alloys friction stir welds\",\r\nMaterials and Design 32 (2011) , pp. 2021-2027.\r\n[16] H. Jamshidi Aval, S. Serajzadeh, A.H. Kokabi, \"Evolution of\r\nmicrostructures and mechanical properties in similar and dissimilar\r\nfriction stir welding of AA5086 and AA6061\", Materials Science and\r\nEngineering A 528 (2011), pp. 8071- 80853.\r\n[17] Changbin Shen, Jiayan Zhang, Jiping Ge, \"Microstructures and\r\nelectrochemical behaviors of the friction stir welding dissimilar weld\",\r\nJournal of Environmental Sciences, 2011, 23(Supplement) S32-S35.\r\n[18] V.-X. Tran, J. Pan, T. Pan, \"Fatigue behavior of spot friction welds in\r\nlap-shear and cross-tension specimens of dissimilar aluminum sheets\",\r\nInternational Journal of Fatigue 32 (2010), pp. 1022-1041.\r\n[19] T-S. Jun, K. Dragnevski, A.M. Korsunsky, \"Microstructure, residual\r\nstrain, and eigenstrain analysis of dissimilar friction stir welds\",\r\nMaterials and Design 31 (2010) , pp. S121-S125.\r\n[20] M. Ghosh, K. Kumar, S.V. Kailas, A.K. Ray, \"Optimization of friction\r\nstir welding parameters for dissimilar aluminum alloys\" Materials and\r\nDesign 31 (2010) , pp. 3033-3037.\r\n[21] N. Shanmuga Sundaram, N. Murugan, \"Tensile behavior of dissimilar\r\nfriction stir welded joints of aluminum alloys\" Materials and Design 31\r\n(2010) , pp. 4184-4193.\r\n[22] D. Muruganandam, S. Ravikumar, Sushil Lal Das \"Mechanical and\r\nMicro Structural Behavior of 2024-7075 Aluminum Alloy Plates joined\r\nby Friction Stir Welding\", 978-1-4244-9082-0\/10\/$26.00 \u252c\u00ae2010 IEEE ,\r\npp. 247- 251.\r\n[23] P.M.G.P. Moreira, T. Santos, S.M.O. Tavares, V. Richter-Trummer, P.\r\nVila\u251c\u00baa, P.M.S.T. de Castro, \"Mechanical and metallurgical\r\ncharacterization of friction stir welding joints of AA6061-T6 with\r\nAA6082-T6\" Materials and Design 30 (2009), pp. 180-187.\r\n[24] C. Leitao, R.M. Leal, D.M. Rodrigues , A. Loureiro, P. Vilaca,\r\n\"Mechanical behaviour of similar and dissimilar AA5182-H111 and\r\nAA6016-T4 thin friction stir welds\" Materials and Design 30 (2009) ,\r\npp. 101-108.\r\n[25] P. Cavaliere, A. De Santis, F. Panella, A. Squillace, \"Effect of welding\r\nparameters on mechanical and microstructural properties of dissimilar\r\nAA6082-AA2024 joints produced by friction stir welding\" Materials\r\nand Design 30 (2009), pp. 609-616.\r\n[26] C. Leit\u251c\u00fao, B. Em\u251c\u00a1lio, B.M. Chaparro, D.M. Rodrigues, \"Formability of\r\nsimilar and dissimilar friction stir welded AA 5182-H111 and AA 6016-\r\nT4 tailored blanks\" Materials and Design 30 (2009) , pp. 3235-3242.\r\n[27] Omar Hatamleh, Adrian DeWald, \"An investigation of the peening\r\neffects on the residual stresses in friction stir welded 2195 and 7075\r\naluminum alloy joints\", Journal of Materials Processing Technology 209\r\n(2009), pp. 4822-4829.\r\n[28] M.A. Mofid, A. Abdollah-zadeh, F. Malek Ghaini, \"The effect of water\r\ncooling during dissimilar friction stir welding of Al alloy to Mg alloy\" ,\r\nMaterials and Design 36 (2012), pp. 161-167.\r\n[29] S. Malarvizhi , V. Balasubramanian, \"Influences of tool shoulder\r\ndiameter to plate thickness ratio (D\/T) on stir zone formation and tensile\r\nproperties of friction stir welded dissimilar joints of AA6061 aluminum-\r\nAZ31B magnesium alloys\", Materials and Design 40 (2012) , pp. 453-\r\n460.\r\n[30] M. Simoncini, A. Forcellese, Effect of the welding parameters and tool\r\nconfiguration on micro- and macro-mechanical properties of similar and\r\ndissimilar FSWed joints in AA5754 and AZ31 thin sheets, Materials and\r\nDesign 41 (2012), pp. 50-60.\r\n[31] P. Venkateswaran, A.P. Reynolds, \"Factors affecting the properties of\r\nFriction Stir Welds between aluminum and magnesium alloys\" Materials\r\nScience and Engineering A 545 (2012), pp.26- 37.\r\n[32] S.H. Chowdhury, D.L.Chen, S.D.Bhole, X.Cao, P.Wanjara, \"Lap shear\r\nstrength and fatigue life of friction stir spot welded AZ31 magnesium\r\nand 5754 aluminum alloys\", Materials Science & Engineering A 556\r\n(2012) , pp. 500-509.\r\n[33] M. Sharifitabar, H. Nami, \"Microstructures of dissimilar friction stir\r\nwelded joints between 2024-T4 aluminum alloy and Al\/Mg2Si metal\r\nmatrix cast composite , Composites: Part B 42 (2011), pp. 2004-2012.\r\n[34] YAN Yong, ZHANG Da-tong, QIU Cheng, ZHANG Wen, \"Dissimilar\r\nfriction stir welding between 5052 aluminum alloy and AZ31\r\nmagnesium alloy\", Trans. Nonferrous Met. Soc. China 20 (2010), pp.\r\ns619\u00b6\u00c7\u00e2\u00a1s623.\r\n[35] C. Liu, D.L. Chen, S. Bhole, X. Cao, M. Jahazi, \"Polishing-assisted\r\ngalvanic corrosion in the dissimilar friction stir welded joint of AZ31\r\nmagnesium alloy to 2024 aluminum alloy\" , Materials Characterization\r\n60 ( 2009) , pp. 3 7 0 - 3 7 6.\r\n[36] A. Kostka, R.S. Coelho, J. dos Santos, A.R. Pyzalla, \"Microstructure of\r\nfriction stir welding of aluminum alloy to magnesium alloy\", Scripta\r\nMaterialia 60 (2009), pp. 953-956.\r\n[37] Y.C. Chen, A. Gholinia, P.B. Prangnell, \"Interface structure and bonding\r\nin abrasion circle friction stir spot welding: A novel approach for rapid\r\nwelding aluminum alloy to steel automotive sheet\" Materials Chemistry\r\nand Physics 134 (2012), pp. 459- 463.\r\n[38] Tomo Ogura,Yuichi Saito, Taichi Nishida, Hidehito Nishida, Takumi\r\nYoshida, Noriko Omichi, Mitsuo Fujimoto, Akio Hirose, \"Partitioning\r\nevaluation of mechanical properties and the interfacial microstructure in\r\na friction stir welded aluminum alloy\/stainless steel lap joint\", Scripta\r\nMaterialia 66 (2012) , pp. 531-534.\r\n[39] R.S. Coelho, A. Kostka, J.F. dos Santos, A. Kaysser-Pyzalla , \"Frictionstir\r\ndissimilar welding of aluminum alloy to high strength steels:\r\nMechanical properties and their relation to microstructure\", Materials\r\nScience & Engineering A 556 (2012) , pp. 175-183.\r\n\u00b6\u00c7\u00c7\u00e2\r\n\u00b6\u00c7\u00c7\u00e2\r\n[40] HanSur Bang, HeeSeon Bang, GeunHong Jeon, IkHyun Oh, ChanSeung\r\nRo, \"Gas tungsten arc welding assisted hybrid friction stir welding of\r\ndissimilar materials Al6061-T6 aluminum alloy and STS304 stainless\r\nsteel\" Materials and Design 37 (2012), pp. 48-55.\r\n[41] Y. Mashiko, Y. Hatsukade, T. Yasui, H. Takenaka, Y. Todaka, M.\r\nFukumoto, S. Tanaka,\"Evaluation of joint interface of friction stir\r\nwelding between dissimilar metals using HTS-SQUID gradiometer\",\r\nPhysica C 470 (2010), pp. 1524-1528.\r\n[42] Tsutomu Tanaka, Taiki Morishige and Tomotake Hirata,\r\n\"Comprehensive analysis of joint strength for dissimilar friction stir\r\nwelds of mild steel to aluminum alloys\" Scripta Materialia 61 (2009),\r\npp. 756-759.\r\n[43] Yoshihiko Uematsu, Keiro Tokaji, Yasunari Tozaki, Yasuhito.\r\nNakashima, \"Fatigue behaviour of dissimilar friction stir spot weld\r\nbetween A6061 and SPCC welded by a scrolled groove shoulder tool\" ,\r\nProcedia Engineering 2 (2010), pp. 193-201.\r\n[44] CHEN Yu-hua, NI Quan, KE Li-ming, \"Interface characteristic of\r\nfriction stir welding lap joints of Ti\/Al dissimilar alloys\", Trans.\r\nNonferrous Met. Soc. China 22(2012), pp. 299-304.\r\n[45] Yanni Wei, Jinglong Li, Jiangtao Xiong, Fu Huang, Fusheng Zhang,\r\nSyed Hamid Raza Joining aluminum to titanium alloy by friction stir lap\r\nwelding with cutting pin\" , Materials Characterization 71, (2012), pp. 1-\r\n5.\r\n[46] Masayuki Aonuma, Kazuhiro Nakata, \"Effect of calcium on\r\nintermetallic compound layer at interface of calcium added magnesium-\r\naluminum alloy and titanium joint by friction stir welding, Materials\r\nScience and Engineering B 173 (2010), pp. 135-138.\r\n[47] Y.C. Chen, K. Nakata, \"Microstructural characterization and mechanical\r\nproperties in friction stir welding of aluminum and titanium dissimilar\r\nalloys\", Materials and Design 30 (2009), pp. 469-474.\r\n[48] Ulrike Dressler, Gerhard Biallas, Ulises Alfaro Mercado, \"Friction stir\r\nwelding of titanium alloy TiAl6V4 to aluminum alloy AA2024-T3\" ,\r\nMaterials Science and Engineering A 526 (2009) , pp. 113-117.","publisher":"World Academy of Science, Engineering and Technology","index":"Open Science Index 76, 2013"}